It would be a genius move if Kemper were able to produce a user or factory installed Processor/RAM upgrade available this year instead of making a whole new unit. I would like to see a mini version of the stage though.
Posts by drandall
-
-
Solved the spillover issue! If I turn off all the Kemper Kone settings then everything works great.
-
I reset my stage 3x, then sold it and bought a new one. Worked great for a month before the issue stared up again. I'm going to start building all my worship presets over from scratch and just screen shot the settings to restore them. I don't even want to save any of the effects to presets incase something is messed up with those
-
I have had this issue with my Stage for two years! Opened a support ticket, sent Kemper the diagnostics they wanted, sent some of my performances I was having issues with and they said spillover did work but sometimes didn't and they didn't know why. I can load these same performances into my Kemper rack unit and they work fine. I sold my Kemper Stage and bought a new one from the Kemper store...what do you know, all the spillovers work again on all my performances...a month later they are starting to fail sometimes, other times they work. Today, hardly anything is working again. My old rock performances always work but they have very little effects, only an ambient verb and a little delay. My worship performances are mostly from tone junkie and loaded with effects. My new theory is it is a processor/ram issue. I think the processor/ram can't always handle a lot of effects and just chokes out the spillover at preset changes involving a lot of verb & delay. It's very frustrating and I've purchased a QC that I'm working into my rig. The amp tones and effects aren't as good but it always works on spillover effects which is a must on worship stuff. I'm not sure what else to do, I love Kemper and have been using it since 2014 but this issue isn't getting fixed and at last check a month ago, support still had no answer. I thought I was the only one experiencing it?
-
Go to Tone Junkie and download some of their worship packs. Huge delay/reverb profiles and synth/pad settings that would work for what youre going for
-
interesting.
i would actually like a way to turn it off ?YES! Kemper, please give us a setting to disable this!!!
-
So after doing a support ticket on this I found out it only does this action while plugged into the rig manager. Unplug the rig manager and works as it should
-
When I change a preset on rig button #2 in performance mode by engaging a stomp I can't go back to the original saved #2 preset by stepping on the #2 button again. The stomp or any parameter I might have changed stays until I load a different performance and then come back, then it's back to the prior saved mode. So if I'm playing preset #2 and I add a couple stomps, I want to hit preset #2 again to go back to my original setting. This is the way I have always had my Kemper set up in the past but I noticed it is now different since the recent OS update. Where is the setting to put this back the way I want it (like I used to have it). BTW...I use my Tap button to switch morphing so I have the "rig button morph" button off in system settings page 3.
I went through the manual and the rig morph button is supposed to be the setting, as it was before this last software update.
-
+1 on the amp compression, I stumbled across that setting early on and love it
-
I can't seem to post a picture any longer from my photobucket account without it being blocked
I got the stage for my worship gigs, I also have two KPA racks. This is such an easy set up for quick set ups. Temple Audio Duo 24 board and ME expression pedal
[Blocked Image: https://i1220.photobucket.com/albums/dd448/parisblue1/KPA-S%20small.jpg]
-
I have one and use it in combination with the Rig Manager. I would be missing either one if I went without
-
I got the stage for my worship gigs, I also have two KPA racks. This is such an easy set up for quick set ups. Temple Audio Duo 24 board and ME expression pedal
[Blocked Image: https://i1220.photobucket.com/albums/dd448/parisblue1/KPA-S%20small.jpg]
-
I'm not a fan of the retro looking knobs or the added red colors
-
I also found it helpful to tweak my profiles to our PA. After practice I would stay with our sound guy and really dial in the sound. That made a world of difference hearing it that way VS my studio monitors ( i run direct to FOH with no cabinet and use IEM for stage)
This is the most important thing to do if you use the same PA at every gig (and even if you don't it will help on all systems)!! Tweak your tone through the PA!! This is what the audience hears and if it sounds bad through the FOH speakers then it's just not going to work. I tweak my Kemper profiles to sound great through our PA and try to keep the FOH mixer guitar channel EQ as flat as possible. In the end, I use the same profiles on my studio stuff and it sounds great on there as well.
-
Thanks for the kind words guys, Here is the Spotify link to the entire album:
-
Here is my Reverb page for this, please contact me directly on here if you want to do a private sale or you can use Reverb also. I'm only shipping to continental US at this time.
-
Hey Dale, well done, mate.
Interestingly to me, some passages remind me very much of Vai's big-production '90s albums - the arrangement and harmonic relationships.
Did you use Aaron for any solos on this album, or is it just you and Fred?
Thanks! Yes, Fred is playing drums on every track and Aaron is only playing on Edis Nilleh; rhythm guitar on the right side and solo. This was a song we wrote together in 2006 and he had to quit the project for his internship to be a doctor and never got to do the studio work with me on it. You can find the original version on youtube as "7teen Crash - Edis Nilleh"
-
Here is a teaser from my new solo cd coming out Jan 18, 2019 on all digital media outlets. All guitars & bass via Kemper
-
Just got my rack skins from Happy Kemper Skins for my studio & live KPAs! I love it!
-