There is a workaround for your 2nd problem. It's not perfect but works (for me):
open RM first, wait until your Profiler shows up in the tree, then start Logic.
There is a workaround for your 2nd problem. It's not perfect but works (for me):
open RM first, wait until your Profiler shows up in the tree, then start Logic.
An additional column „LQ“ in RM would do the job, I think.
Not sure that is needed though? (also not sure that was a comment for me :))
This is what b_ryan wants according to the description in his first post:
I wish to be able to just turn on my Mac and my Kemper and just have it hooked up like normal (speakers to the audio interface) and be able to hear myself playing.
I wish NOT to be limited to listen to my live recording through the monitor of the audio track in Logic Pro. Why can't the Kempers USB signal reach my audio interface? Why do I have to connect speakers to the Kemper to hear it?
Just tried GroundControl (it‘s free), works, even if not plug and play. Had to add the profiler as input device and set lower latency.
The aggregated device doesn‘t route the audio from device to device.
And yes….it’s absolutely true that the USB reaches the computer first. That’s what I think should still be easy to solve.
It is: the solution is an audio routing software as I mentioned in my previous post.
b_ryan: you could try an audio routing software, such as GroundControl or Omnibus.
Display More1) you set input (guitare gain, input or alternate input etc)
2) in most case this section is locked (so become general)
3) you set general purposes for the ring, routing etc..
4) you decides effects etc...
Not logical ? So I have to rebuild my logic, but it would be late
You are surely aware that the GUI represents the signal chain, right? Putting your ‚Definition‘ thingy inside the chain (please refer to your picture) would suggest, that e.g. the parameter „Rig Volume“ affects the signal prior to the stomp section. This is definitely not the case.
Kempers definition of a rig taken from the main manual, page 20:
'A complete signal chain comprising amplifier, guitar cabinet and potentially multiple effects is called a “Rig”.
The signal chain of any Rig begins at the Guitar Input, passes through four effects modules, the stack section, and then followed by another four effects modules.'
There is no need to be unfriendly virango D:
It's a fact that you can't change the amp cabs by a drop down menue or anything else. That's my message!
If I can change the amps and cabs at the profiler, why I can't change them in the editor. That's it!
I'm really sorry that my post appeared unfriendly to you, it surely wasn't meant so. The fact is you can change cabs and amps in editor, s. @DamianGreda's post above.
I also find it a bit confusing, hence you can select an empty slot and select en FX from a drop down list ... imho it would be logic to do this for all blocks !
The drop down list on an FX shows FX-Types not presets; there are no cab or amp types, just presets . Imagine a drop down list with 100+ (or even more) entries for all your stored (locally and in profiler) presets. Not really usable .
No there is no option or scroll down menue to change the cab/amp in RM 3
Apparently you didn't understand the basic concepts (cab/amp are presets ==> use drag&drop from the preset list to change them), so please RTFM as mentioned by Timo.
Are you using the Remote or an external switch?
The Remote is described in the Main Manual in great detail and including how to overdub.
If you are using external switches make sure, that these are momentary (non latching) AND the polarity is set correctly. Otherwise you might experience very strange situations with the looper.
He wrote about KPS, so I think he means Stage.
... and hence definitely needs an editor. Only then it can unroll the toilet paper with a mouse.
After all: the monkey testing started, release soon?
Why? and how do you expect Kemper to come out with a working Editor if we can't even get a update through Rig "Manager"
And how do you expect to get useful advice/help if you just say "it's fails to install"? It's a little bit vague.
What's your OS?
Profiler Model?
Current FW version?
Rig Manager version?
Any idea when v.7 will filter down to the rest of us?
It's there. Check https://www.kemper-amps.com/do…ting-System-Beta-Versions. Also a new 2.3.1 version of RM (with some new cool features).
If I delete one that is used in a performance, does it disappear from the slot?
No, it doesn't. Performances consist of copies of profiles (not links).
Btw. I have about 30, considering it still to much.
Can the number of cabinets loaded on the Kemper cause a problem with communication?
Yes, it does.