Hey Guys!
I just got a new pedal so I made a bunch of profiles that are up on the rig exchange and my Dropbox (link below). The Rusty Box Pedal by Tronographic is a recreation of the pre-amp section from the Traynor TS-50b bass amp. Let me know what you think!
Posts by mcusano7
-
-
Thank you!
no problem!
-
I tried these with a tele and they were both very tasty - thanks for sharing.
awesome! I used a Les Paul for the refining and such so I’m glad it sounds good on a tele too!
-
Thank you!
Hey, it's the least I could do! I have a bunch of your synth style profiles that are awesome so thanks for being pretty innovative with profiling!
hey these great!
thanksNo problem!
-
Hey! I made some profiles of my friend's Supro Dual-Tone. There is a clean profile and a distorted profile. They both have similar tone settings so the only real difference is the gain. I profiled using a 57 a few inches off the cone and its a combo amp so the cab is the built in cab. If you don't know anything about this amp, essentially its a Supro that is either a single channel or a Jumpered 1+2 channel. Both these profiles were done on the jumper channel.
I looked up the manual online to see what the "Recommended setting" is and I used that for the distorted profile and then just backed off on the volumes for the clean profile.
It's on the Rig Exchange or right here in my dropbox. https://www.dropbox.com/sh/tfx…ekHh28t-H7lliY2hVSqa?dl=0
Let me know what you think! Enjoy!
-
Does anyone know if there are any Traynor TS-50B profiles out there (paid or free)? I ended up using the head on my last record for some distorted bass parts and I'd love to have a profile for a similar sound for live use! I know it's something I can create a similar sound by use of the stomps and such but I like to keep it as simple as possible on my rigs.
-
Thx man!!
I will try tomorrow!!!
Cheers
Thank you, Matthew.
No problem! Hope you like it guys!
-
Hey guys, I made a profile of a Fender Bassbreaker head with a Celestion V-type speaker in a 2x12 cab. I'd love to get some thoughts on it as it's one of my first profiles. It's in the rig exchange as of this morning but I'll attach it to this post as well. Thanks!
-
Hey Guys!
I've had my Kemper for a month or two now and I finally decided to try and make my own profiles. My first one is a 70's Fender Bassman Ten (Silverface) with a Walrus Audio 385.When I got the Bassman, the previous owner had removed the cab and converted it into a head so the cabinet is a Black Market Custom 2x12 with Celestial V-type speakers. I used a Sennheiser e906 close to the center of the cone.
I'd love to hear what you guys think and what you recommend to improve my profiling in the future.
I just uploaded it to the rig exchange but here's a dropbox link to the profile
https://www.dropbox.com/s/5cc5…7-08%2014-07-48.kipr?dl=0Thanks!
