KEMPER PROFILER Specifications
Dimensions
PROFILER Head and PROFILER PowerHead:
Height: 21,7 cm (8.54 inches)
Width: 37,8 cm (14.88 inches)
Depth: 17,3 cm (6.81 inches)
PROFILER Rack and PROFILER PowerRack:
Height: 13,9 cm (5.47 inches),
3 HE (3 RU)
Width: 48,3 cm (19 inches)
Depth: 22 cm (8.66 inches)
PROFILER Stage:
Height: 8,5 cm (3.35 inches)
Width: 47 cm (18.5 inches)
Depth: 26 cm (10.24 inches)
PROFILER Remote:
Height: 7,5 cm (2.95 inches)
Width: 42 cm (16.53 inches)
Depth: 18 cm (7.09 inches)
Weight
PROFILER Head: 5,32 kg (11.73 pounds)
PROFILER Rack: 5,00 kg (11.02 pounds)
PROFILER PowerHead: 6,50 kg (14.33 pounds)
PROFILER PowerRack: 6,18 kg (13.62 pounds)
PROFILER Stage: 4.6 kg (10.14 pounds)
PROFILER Remote: 2.9 kg (6.39 pounds)
Analog Inputs PROFILER Head, PowerHead, Rack, and PowerRack
Front INPUT:
¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
ALTERNATIVE INPUT:
¼ inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
RETURN:
XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
Analog Inputs PROFILER Stage
INPUT:
¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
RETURN 1-4:
¼ inch TRS balanced with ground lifts, dynamic range =105 dB, impedance 100 kohms
Analog Outputs PROFILER Head, PowerHead, Rack, and PowerRack
MAIN OUTPUT L and R:
XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
MONITOR OUTPUT:
¼ inch TS unbalanced with ground lift, output level: +4 dBu
DIRECT OUTPUT/SEND:
¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
HEADPHONE Output:
¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
Analog Outputs PROFILER Stage
MAIN OUTPUT L and R:
XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
MONITOR OUTPUT L and R:
¼ inch TS unbalanced, output level: +4 dBu
SEND 1+2:
¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
HEADPHONE Output:
3.5 mm TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
Digital Inputs and Outputs PROFILER Head, PowerHead, Rack, and PowerRack
S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit)
with RCA phone connectors for coax cables
(master only)
Digital Inputs and Outputs PROFILER Stage
S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit)
with RCA phone connectors for coax cables
(master or slave)
Power Amp PROFILER PowerHead and PROFILER PowerRack
SPEAKER OUTPUT: 600 Watts at 8 Ohm, 300 Watts at 16 Ohm
Control and Data Interfaces
MIDI IN/OUT/THRU:
5-pin DIN connectors
SWITCH/PEDAL:
¼ inch TRS, each for
mono/stereo switch or expression pedal
(10 kohms min, 100 kohms max. impedance)
Network:
RJ45 connector (not applicable on PROFILER Stage)
USB:
USB 2.0 (FS) compatible device,
USB-A and USB-B connectors
Electrical Requirements
Line Voltage:
Head/Rack 90-275 V AC, max. 0.5 A
PowerHead/ PowerRack 100-125 or 190-245 V AC, max. 10 A
Stage 100-230 V AC, max. 0.5 A
Frequency:
50 Hz to 60 Hz, single phase
Environmental Requirements
Operating Temperature:
10° to 35° C (50° to 95° F)
Non-operating Temperature:
-20° to 47° C (-4° to 116° F)
Relative Humidity:
5% to 95% non-condensing
Maximum Altitudet:
3000 m (10,000 feet)
Electrical Approvals
FCC Verification procedure – 47CFR §15.101
Other Class B digital devices and peripherals
PROFILER Head/Rack/PowerHead/PowerRack:
EN 55022 class B: 2006+A1:2007
EN 61000-3-2: 2006 + A1:2009 + A2:2009
EN 61000-3-3: 2008
EN 55024: 1998 + A1:2001 + A2:2003, 2010
PROFILER Stage:
EN 55032:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 55035: 2017
