Is there a way to get two monitor out with the cab off. I don´t want to have to switch off cab off on individual Rigs. I can't find any solution i the manual, maybe missed something?
Grateful for all suggestions. /Hans J
Monitor out, cab off. 2xmono/stereo ?
- lobster56
- Thread is marked as Resolved.
-
Monitor out in stereo with cab off is not possible.
-
The cab can be switched off per rig, but not for the monitor. I cannot see an application for this.
-
It's really nice and impressive to get answers from the creator:) Sorry, my poor description, I meant cab sim off, not cab off
Me and my band mate mainly use our KPA's in the back line. Monitor out -power amp -guitar cab. We prefer the stage sound of the guitar cab. So it would be nice to have the ability to connect a right and a left channel -monitor out cab sim off. To spread the sound, get effects in stereo.
And off course, CK, you really made the world a better place, I'm sure. I'm nearly 60 and I'm a much better guitarplayer now. This fabulous machine makes it possible to improve my playing, makes it so fun. It's lika x-mas every day actually.
I hope you and your colleagues gets at long restful x-mas vacation .
Best regards from Umeå -Sweden. Why not visit Guitars the museum. http://www.guitarsthemuseum.com/static/sv/80/ -
Do I get you correctly, that you want all rigs to have cab section off? If so, just turn the cab off for any rig, then press and hold LOCK button and while holding LOCK button press once the CAB button. Now all rigs will have cab section turned off.
-
Do I get you correctly, that you want all rigs to have cab section off? If so, just turn the cab off for any rig, then press and hold LOCK button and while holding LOCK button press once the CAB button. Now all rigs will have cab section turned off.
Really terrible in explaining, sorry. There are times when we connect main out to FOH or to our own mixer for in ear monitoring, so I can only use the monitor out for stage sound, and I really prefer that monitor out sound as well. If there was a way I would like to have a monitor out with cab sim switched off globaly (Thats the way we do it already), but we would like two outputs, a two channel, right/left, set up. I mean like many players used to do, pre KPA, with rack pre amps and a two channel tube/solid state power amp.
-
OK. Now I get you. In this case I am afraid that ,as Ingolf stated, you can not have Monitor stereo output with cabinet turned off.
-
As far as I know, it is possible:
You can switch of Cab Sim global, as mentioned before. Then you can use monitor out for left channel signal and effect return for right channel.
You will have to assign that in the Master Section.Jim
-
Effect send. sorry
-
Yes, but you then you will not be able to use the main out with cabdriver.
EDIT: cabdriver - thank you Ingolf
-
Yes, but you then you will not be able to use the main out with cab.
Exactly.
Actually we are talking about cabdriver which is only available on monitor out (in mono). -
No THATS a very intressting disscussion!
I just have the same issue.... My Live-Setup has the Master Outs directly attached to the FOH. But I use my Engl 2x50W Poweramp+ Stereo Marshall Cabinet es Monitor.
Because of the Kemper only having a Mono Monitor Out, i need a chanal switch to make Mono -> Mono/Mono for my Engl Inputs...but I also don´t see any other way to do this....
-
No THATS a very intressting disscussion!
I just have the same issue.... My Live-Setup has the Master Outs directly attached to the FOH. But I use my Engl 2x50W Poweramp+ Stereo Marshall Cabinet es Monitor.
Because of the Kemper only having a Mono Monitor Out, i need a chanal switch to make Mono -> Mono/Mono for my Engl Inputs...but I also don´t see any other way to do this....
You can use the Monitor Out AND Direct Out with your stereo power amp.
-
Really? I thought the Direct out is like a bridget input-to-output channel for things like Re-Amping delivering only a clean signal from the input....hmm....maybe should reread the manual
-
Look at the Ouput Settings for Direct Out and Monitor Out. You can make stereo or mono outs with them.
-
nice!!
-
The only downside with doing this is that you can have cabdiver only on monitor out, not on the direct out.
This will make for a sub- optimal experience when using non-FRFR cabs. -
Sorry guys, I can not follow this but I think I have the same issue. I want to use my ISP Stealth power amp and 1x12 guitar cabinet on stage BUT I want the full profile to go to FOH.
So I would go Monitor Out > Power Amp and then Main out to FOH?
Is Cab Driver something that is automatically engaged when turning the cab off on the front? Sorry but I have a gig Monday and just got my KPA last night. Great piece of kit by the way.
-
No, not in the Amplifier Section (on the front of the Kemper). That would turn it off in the MAINs, too.
And, It is not automatic when you plug a cable into the MONITOR OUT.
You need to set that with:
The Output/Master button (page 24)
This button brings the Output settings into focus.
“MonitorCabOff”, a global switch to bypass the virtual speaker cabinet individually for the Monitor Output.
-
The only downside with doing this is that you can have cabdiver only on monitor out, not on the direct out.
This will make for a sub- optimal experience when using non-FRFR cabs.Ingolf is correct. Unless you are using DI profiles, keep using your Mono -> Mono/Mono solution.
