UPDATED Complete list of MIDI control change numbers (CC#s) incl. 1.5.0. Public Beta

    #1 Wah Pedal
    #7 Volume Pedal
    #16 All Stomps Invert
    #17 Stomp A on/off
    #18 Stomp B on/off
    #19 Stomp C on/off
    #20 Stomp D on/off
    #22 Stomp X on/off*
    #24 Stomp MOD on/off
    #26 Delay on/off (cuts tail)
    #27 Delay on/off (keeps tail)
    #28 Reverb on/off (cuts tail)
    #29 Reverb on/off (keeps tail)
    #30 Tap
    #31 Tuner Select
    #33 Rotary Speaker (slow/fast)
    #68 Delay Mix*
    #69 Delay Feedback*
    #70 Reverb Mix*
    #71 Reverb Time*
    #72 Gain*


    *since firmware 1.5.0


    For further details regarding MIDI operations please refer to the KPA Reference Manual, which you can download from our support page.

    Hi,


    This list is correct but it is good to remember that if you use CC #26 to turn off delay you will also turn off the delay trails.


    If you use CC#27 and send value 0 you will hear only the dry signal of the notes you play after that but you will hear the delay trails from the previous notes. The same goes for the reverb.


    Cheers,


    Mats N

    Delay and Reverb Mix doesn't work for me. I sent CC 27/29 with values 0-127... nothing happens.

    MJT Strats / PRS Guitars / Many DIY Guitars -- Kemper Profiler Rack / Kemper Remote / InEar

    Here is an updated list including new CCs introduced in public beta 1.0.3


    Complete list of MIDI control change numbers (CC#s)


    #1 Pedal 1 (Wah Pedals)*
    #7 Pedal 2 (Volume Pedals)*
    #16 Stomp Invert**
    #17 Stomp A
    #18 Stomp B
    #19 Stomp C
    #20 Stomp D
    #23 Stomp X
    #24 Stomp MOD
    #26 Delay (mute trails)
    #27 Delay Mix (keep trails)
    #28 Reverb (mute trails)
    #29 Reverb Mix (keep trails)
    #30 TAP
    #31 Tuner select
    #33 Rotary Speaker (slow/fast)


    * since operating system 1.0.1 public beta
    **since operating system 1.0.3 public beta


    For further details regarding MIDI operations please refer to the KPA Reference Manual, which you can download from our support page.

    Quote from schneidas

    One beta 1.0.3. on the rocks... coming up!!! :D

    They better release this until i start profiling the Mesa 4 x 12 tomorrow. The actual fireware fucked up about a third of all the profiles i made with a horrible distorted tone and feedback. I can´t really see what might cause this problem, it just seems to happen sometimes...

    Did you contact them about that weird issue with the current FW 1.0.2?
    Did you reset your KPA by pressing the System button during startup?


    I hope they'll upload it today so we can get more of your great cabs!

    1.0.3 ?(


    are there any secret dropbox links?
    If anyone knows about it - please send me a pm - I hate this corrupted high gain profiles as well.

    (All trademarks are trademarks of their respective owners, which are in no way associated or affiliated with soundside.de)


    Great Profiles --> soundside.de

    Question: What does the "E" mean in the upper right corner next to the date and name of the profile generator?


    I get this "E" while trying to switch the delay mix on and off. With my Gordius Little Giant I have the possibility to send
    two message streams. The 1st one with 1st step on the switch and 2nd one with (guess what?) the 2nd step (like an on/off switch)
    Data sent is 1st CC#27 value 1 and 2nd CC#27 value 0. This is what happens:
    - 1st time hitting the switch nothing happens
    - 2nd time nothing happens with the stomp and the "E" appears
    - 3rd time delay stomp turns on
    - 4th time delay turns off and the "E" persists


    Any ideas?


    Greetings
    Pit


    [Blocked Image: http://s7.directupload.net/images/120212/temp/6u9dfszn.jpg]

    Hi,


    It simply means that the rig has been edited since last saved.


    Cheers,


    Mats N

    Have you tried using 127 instead of 1?

    "Music is enough for a lifetime, but a lifetime is not enough for music" Serghei Rachmaninoff


    I'm a midiot and do not know how to set up a Line6 X3 floorboard to control the KPa. The Volume pedal works and program change up/down work. Do I just need to go into the X3 and tell it which cc commands are assigned to each IA?


    As a default, the delay IA on the X3 turns off the reverb on the KPA!


    Any help is appreciated.