i talked with ISP this week,the STEALTH amp is ready to ship as soon as NAMM is over $399 msrp, should be cheaper thru a retailer, i would really like to try one..
The problem that I see is that the depht of the KPA cavity is less than 4 inches and the power cord of the ISP seems to be on the back of the device so it would be hard to fit the amp there.
Cast my eyes over this one, do you think this could be something to check out!
The powersupply might not fit without some modifications, but if this is of good quality
i would definitely try it out, and these comes in stereo too!
http://www.ebay.com/itm/ws/eBa…Name=ADME:X:BOCOR:US:1123
A video of the KPA opened!
Display MoreCast my eyes over this one, do you think this could be something to check out!
The powersupply might not fit without some modifications, but if this is of good quality
i would definitely try it out, and these comes in stereo too!
http://www.ebay.com/itm/ws/eBa…Name=ADME:X:BOCOR:US:1123
A video of the KPA opened!
Very Nice ETS!
So buy it and give us your feedback 
P.S: isn't it a little underpowered? It's 600w on 2 ohms, but many cabs are just 8/16 ohm.
Very Nice ETS!
So buy it and give us your feedback
P.S: isn't it a little underpowered? It's 600w on 2 ohms, but many cabs are just 8/16 ohm.
You're right, it is a little underpowered, it only gave 200w in 8 Ohms and i think it will be
difficult to install it in the KPA too, but for home use i think it would be enough,
you could just install it in your guitar cab and that way make it aktive!
Maybe i go for it, the only way to find out is to try, and it is inexpensive! 
It looks interesting!
The problem that I see is that the depht of the KPA cavity is less than 4 inches and the power cord of the ISP seems to be on the back of the device so it would be hard to fit the amp there.
Perhaps it will work with some angled jacks and turning it 180? 
BTW - The power jack is just below the "Level" control, on same side as the inputs and outputs.
BTW - The power jack is just below the "Level" control, on same side as the inputs and outputs.
You're right! 
So it could works then!
I saw that new ISP and thought it might be a good partner for the KPA as well. However, its Class A/B fanless design and as such heat is a concern mounting it into the back of the KPA. I think mounting into (or on the back side of) a cabinet would be a much safer option.
Will, the fans cheer and wave their arms wildly when you play, providing all the cooling you need.
I think it can be velcroed to the back like the smaller ehx magnum 44, but I'd like to see the size of the adapter also. They can be big.
Just saw this. Might be a good option for some:
http://www.premierguitar.com/M…he_Stealth_Power_Amp.aspx
I just go direct but, I know there is a lot of talk here about this stuff. Nice and light at least--1.2 lbs. No word on price yet.
9 inches long, 4 inches wide and 2 inches tall
J
They list the stealth power amp at $399 and I guess it will likely cost less than list, like other products.
info from this link. http://www.sevenstring.org/for…-stealth-power-amp-2.html
Here is a video from that link with the new ISP stealth power amp used with the ISP Theta pre amp.
I guess it would fit nicely back in a kemper profiling amp toaster. 
[YOUTUBE]
Here is a video from NAMM where they talk about the ISP stealth power amp at 5:10 min.
They're saying the street price will be $332 ($399 list).
Also some new cabs at the end of the video.
[YOUTUBE]
Now if they can just get the speaker cabs down to 2 lbs
Now if they can just get the speaker cabs down to 2 lbs
Maybe some new fantastic materials in the future could do that, or at least cut the weight in half.
I just noticed that the ISP Stealth power amp is available now and in stock at Sweetwater, link.
http://www.sweetwater.com/store/detail/StealthAmp
Anybody here thinking of using it with the kemper?
Anybody tried this yet? Not talking about size, more interested in if it has enough power, and how it sounds?
I was looking into it a month ago, and according to all the internet reviews i read, its great for bedroom use but lacks power. I winded up getting a matrix, wished they made that matrix prototype that fit in the back of the kemper still....
FWIW, when it comes to retrofitting the profiler I'd recommend the Camplifier series by http://www.KPA-solutions.com over anything.
Made by Marco Wendel & Tilman Ritter, and that's quite an expertise!
