Kemper live

Don't know if I understand you correct, but from XLR Out to PA you don't need a DI-Box if you're using XLR-cables.

Also I don't understand why you don't want to be independent from FOH?
I always give an XLR from main out to FOH and a normal TS plug from monitor out into my DXR 10 or CLR.

This is of interest to me as well as I will be gigging with my KPA next weekend. Do I come off the DXR 10 line out or the Kemper line out?
Which gives me the best options?

Thanks,
RC

I'd use the Kemper line out, so you have separate control over your stage volume...and tone.

I would use the Main XLR outs to the FOH then use the monitor out to the DXR.

Then In the output settings on the kemper Link the monitor output only to the Master volume,

that way you can control you DXR volume from the kemper without changing the Main output level to the FOH.

What i would like to ask is if there is any difference in sound using DRX 10 between Kemper's main xlr outs and main or monitor ts outs! Is it wrong to connect my Kemper with main xlr outs to DXR 10? Because you all suggest using ts outputs to connect kemper with DRX 10! Are main xlr outs meant to be given only to FOH?

Thanks in advance

I don't think there is any difference other than you can turn the cab section off for the monitor out but it will still be on for the FOH

Sent from my iPhone using Tapatalk

Quote from Raoul23

I don't think there is any difference other than you can turn the cab section off for the monitor out but it will still be on for the FOH

Sent from my iPhone using Tapatalk

Thanks for your answer but what i would like to know most and make it clear to my mind is if main xlr outs give different sound from main ts outs. Because i connected my kemper with main xlr outs to an EV ZLX-12 frfr speaker and the sound was very harsh even after eq tweaking. If i used main ts outs the sound would be exactly the same or not? Is it a dB output problem from main xlr outs that make the sound so harsh? Did i do somethirng wrong?

Quote

Thanks for your answer but what i would like to know most and make it clear to my mind is if main xlr outs give different sound from main ts outs. Because i connected my kemper with main xlr outs to an EV ZLX-12 frfr speaker and the sound was very harsh even after eq tweaking. If i used main ts outs the sound would be exactly the same or not?

As long as you have CAB engaged they will be exactly the same. I'm not familiar with the EV speaker but with my DXR10's the kemper sounds awesome

Sent from my iPhone using Tapatalk

Oh, i see! Thanks for your answer