Display MoreSo many posts and no clear solution or explaination?
The manual states that the direct out is the (only) send even for the stereo loop.
Any time a loop becomes active, the direct out will switch from its selected output source to the correct loop send signal.
The monitor output does not do that. If you set it to MOD output it will output the signal of the MOD effect.
If you establish an effects loop in the X or MOD slot, the monitor output will tap the output of the effects loop, not the input. This will create a feedback loop.
You could have tried to set the output source to 'stack' for avoiding that, but it's not a perfect solution either.
Anyway, I cannot see a sense in putting capi preamps into the effects loop. Why don't you connect them to the Profilers main outputs?
Thanks for taking the time. The way it works is logical and is what i would have believed, if not for 01000100s post, in combination with a memory of me trying to do this when it almost worked.
As i wrote in my last post, i got it sorted out, that i can't do the things i tried to.
The reason for wanting them in the fx loop, is because i wanted to be able to process audio, sending from and to the computer via spdif. I have a too crappy interface to do it the "right" way for now. If i go out of the Kempers main outputs, i have to use the interfaces line inputs, which colors the signal in an unpleasant way. And i don't feel like upgrading to a mid level interface for this, since i want to wait until i can get really high quality gear.
I didn't really want to bump this thread, but i felt it warranted an explanation.