Noticed something a bit weird with the noise gate on my KPA (latest firmware)
Can anyone else please try this and see if it happens for them too.
First off, get a med to high gain rig, one that introduces a little bit of hiss/noise.
Now as you increase the noise gate slowly (0.1 steps at a time) the hiss subsides, as expected.
Now, Slowly turn down the noise gate by 0.1 steps (the noise increases as expected) until you get to 0.0 then what would be one more turn in an attempt to go lower the 0.0 and (to me) there is another level of noise-reduction, as if the noise gate goes to -0.1 but the display stops at 0.0
Its not a performance-threatening situation but curious if this is present with any other users.
I do notice on some other parameter that go to negative values that there are two "zero" values, sometimes shown as <-0.0> and <0.0> (one has the minus sign)
Might be related to this.
thanks to anyone that attempts to confirm this for me