Looper is working through MIDI, KPA Team made it available in 3.0.2 Public Beta:)(UPDATED 26.03.2015)
-
-
Hey,
maby this isn´t new, but i did´n find this information like this:
i think i got the looper now in whole function, exactly like the manual describes it like it handles with the original remote:
I tested ALL functions, including The Advanced features (holding buttons) - everything works here..
But as said somewhere above you need a controller, that sends different Messages when pressing and releasing.Otherwise you can get the looper to work with the messages described in the original post.
So:
You do NOT need to program a state-machine for the buttons only for the LEDs to make them show the state of the looper.In Decimal-values (sorry, its simpler for me than hex) you just have to send following NRPN commands:
Important: On Press of the button, always send Value 1, on release of the button always send Value 0
CC#=controllernummer, V=ValueButton 1: Rec/Play/Overdub:
CC#99 V125, CC#98 V88, CC#06 V0, CC#38 V1 (on press), V0 (on release)
Stop/Erase:
CC#99 V125, CC#98 V89, CC#06 V0, CC#38 V1 (on press), V0 (on release)
Undo:
CC#99 V125, CC#98 V93, CC#06 V0, CC#38 V1 (on press), V0 (on release)
Trigger
CC#99 V125, CC#98 V90, CC#06 V0, CC#38 V1 (on press), V0 (on release)
Reverse
CC#99 V125, CC#98 V91, CC#06 V0, CC#38 V1 (on press), V0 (on release)
1/2 Speed
CC#99 V125, CC#98 V92, CC#06 V0, CC#38 V1 (on press), V0 (on release)Martin
-
Hi Martin
Can you send me ino. files.? Please.
Thank you Mirek
-
hi,
here is my ino-file ...
but:
1. i´m not a programmer, so i REALLY don´t know, if you even do programming that way, i did, or if there are WAY better ways - a friend of mine (programmer) just told me when reading my code: ".. hmmmmmm, so, if its working... "
2. EVERYTHING is totally personalized for my needs ... but maby you can get some ideas out of it :-). Maby you don´t get any of my ideas, without me explaining itIts all in the ino file, no extra files except the included libraries..
After all: Many of my comments are in german ... some in english..
greetings
Martin -
hi,
here is my ino-file ...
but:
1. i´m not a programmer, so i REALLY don´t know, if you even do programming that way, i did, or if there are WAY better ways - a friend of mine (programmer) just told me when reading my code: ".. hmmmmmm, so, if its working... "
2. EVERYTHING is totally personalized for my needs ... but maby you can get some ideas out of it :-). Maby you don´t get any of my ideas, without me explaining itIts all in the ino file, no extra files except the included libraries..
After all: Many of my comments are in german ... some in english..
greetings
MartinThank you.
-
Thanks, I'll give this a try and decimal is easier for me as well
sean
-
So all I need to do is program my controller to is set up CC# 34 and a set of values and it should just work? No mods etc...?
-
No,
you have to send nrpn-Commands (Messages)
one nrpn-message is the Combination of 4 Controlchanges.
for Example to set the looper to rec. You have to send
CC#99, value 125
cC#98, Value 88
CC#6, value 0
CC#38, value 1In that order, in one step. ... The Combination 125 and 88 is the nrpn-adress (looper Record) , the Combination 0 and 1 is the value.
martin
-
No,
you have to send nrpn-Commands (Messages)
one nrpn-message is the Combination of 4 Controlchanges.
for Example to set the looper to rec. You have to send
CC#99, value 125
cC#98, Value 88
CC#6, value 0
CC#38, value 1In that order, in one step. ... The Combination 125 and 88 is the nrpn-adress (looper Record) , the Combination 0 and 1 is the value.
martin
How do i send nrpn-commands?
-
No,
you have to send nrpn-Commands (Messages)
one nrpn-message is the Combination of 4 Controlchanges.
for Example to set the looper to rec. You have to send
CC#99, value 125
cC#98, Value 88
CC#6, value 0
CC#38, value 1In that order, in one step. ... The Combination 125 and 88 is the nrpn-adress (looper Record) , the Combination 0 and 1 is the value.
martin
I take it fcb1010 with uno chip can't do that cause it can only do 2 CCs?
-
ok.
Do you like Diy.?
Buy Arduino 30$,
5 switch and leds.
You can send what you want.NRPN or Cc#,Sysex.
I am now working on tempo quantization. I can select tempo:-D and kemper stop recording and play in tempo.
Who can do it,too? -
ok.
Do you like Diy.?
Buy Arduino 30$,
5 switch and leds.
You can send what you eant.NRPN or Cc#,Sysex.
I am now working on tempo quantization. I can select tempo:-D and kemper stop recording and play in tempo.
Who can do it,too?
Do you know how to retrive tempo from KPA? ;D I can help:) -
I am now working on tempo quantization. I can select tempo:-D and kemper stop recording and play in tempo.
Who can do it,too?
I could, if i want to
But I don´t need it till nowMy controller accepts MidiClock and syncs the Kemper with it.
Martin
-
-
I could, if i want to
But I don´t need it till nowMy controller accepts MidiClock and syncs the Kemper with it.
Martin
I know Martin. You have better controler.
-
I take it fcb1010 with uno chip can't do that cause it can only do 2 CCs?
right... you would have to set up 2 Switches: first with 2 CCs and second with 2 CCs... and then press them one after another to send 1 NRPN-Message.
-
I know Martin. You have better controler.
Sorry... but you´re right: I´m a little Proud of my project, because i think it got real good and I´m a beginner and no professional in all this. just a hobby. -
Sorry... but you´re right: I´m a little Proud of my project, because i think it got real good and I´m a beginner and no professional in all this. just a hobby.Two months ago, I didn´t know,anythink about Arduino. .
For me is hobby too. -
Sorry... but you´re right: I´m a little Proud of my project, because i think it got real good and I´m a beginner and no professional in all this. just a hobby.I envy you
-
Thank you
But I have not bidirectional comunication with KPA.
I am beginner with programing IDE.
I am studiing code in IDE.I am able to only sending.
You can ask KPA about tempo and ... - no need to use bi directional communication