Anyone had this happen? I have the powered toaster and never any problems previously, been stuck for about 15 minutes now. Help! 
Upgrading firmware to 3.0.2, has frozen on "updating power-amp firmware"
- Stevewray
- Thread is marked as Resolved.
-
Power down, put the kaos file in the root directory of the USB, then power up while holding the < > keys.
The profiler will then boot from USB. -
This sounds weird. I'd suggest to open a support ticket.
-
do you actually *have* a power-amp?
be sure to actually have the latest firmware on the stick (and not an old version), and try again with 'booting and burning' (hold < and > during power-up) -
did you try again?
-
Power down, put the kaos file in the root directory of the USB, then power up while holding the < > keys.
The profiler will then boot from USB.This is exactly what you need to do
-
While deferring to the experts, I would suggest shutting it down completely, and unplugging (electric) for a while before trying again. With some computers, this helps make sure the RAM gets cleared - my guess is the Kemper has RAM and it can't hurt.
-
While deferring to the experts, I would suggest shutting it down completely, and unplugging (electric) for a while before trying again. With some computers, this helps make sure the RAM gets cleared - my guess is the Kemper has RAM and it can't hurt.
Good thinking.
-
Power down, put the kaos file in the root directory of the USB, then power up while holding the < > keys.
The profiler will then boot from USB.
Here's a dumb question: at what point can you release the <> keys? -
Here's a dumb question: at what point can you release the <> keys?When you see the 'booting and burning' message.
-
I do as soon as I see the first boot screen, your fingers tired yet?
-
I do as soon as I see the first boot screen, your fingers tired yet?
lol when I upgraded to the beta I held it for about a minute and did the "I guess I can let them go now?!"
