Hi,
It is possible to make a new preset on Kemper? I mean put your amp and cabinet or put a tuner preset, or you have to necessarily step another channel to do?
Thanks
It is possible to make a new preset on Kemper?
- JH-2
- Thread is marked as Resolved.
-
Frankly speaking I don't understand what you want to do.
-
Like creating new patch like in modelers?
-
You can make changes to a Rig, and then "Save As a New Rig", with a new name.
Is that what you are asking?
-
You can make changes to a Rig, and then "Save As a New Rig", with a new name.
Is that what you are asking?
Make changes to rig, press STORE and then select "Save As a New Rig" to be precise
-
-
What controller do you have?
-
I'm not too hot with midi (I've only owned a Behringer FCB1010 with Uno4 Kemper and the Remote), but maybe there's a midi change parameter that can toggle the tuner? I'd check the reference manual and the midi documentation. The Remote has a button to engage and disengage it. If you have an expression pedal set up for volume, you can set the tuner to engage when the volume is at zero (the pedal being fully in the heel position).
-
I'm not too hot with midi (I've only owned a Behringer FCB1010 with Uno4 Kemper and the Remote), but maybe there's a midi change parameter that can toggle the tuner? I'd check the reference manual and the midi documentation. The Remote has a button to engage and disengage it. If you have an expression pedal set up for volume, you can set the tuner to engage when the volume is at zero (the pedal being fully in the heel position).
Sambrox is absolutely right: for tuner you have CC #31
-
You can turn the Tuner on and off if you connect an external momentary push button switch to Pedal 1 or Pedal 2 Input on the back of your KPA.
You can select the Tuner function for this on the System/Pedal page.
-
The Function choices should include Tuner.
-
The Function choices should include Tuner.
sure does, but what does it matter if you try to use polytune as a momentary footswitch.
this is rich
-
A Polytune is a stompbox- it will not work if you connect it to the Pedal input.
It requires an audio signal.The Pedal inputs on the back of a KPA are for Expression pedals or switches. They do not send an audio signal - they send a control voltage.
-
You're a Saint Paul.
-
LOL! Thanks
