Hi friends,
Somebody how I can activate Kemper Level Tuner with my pedalboard?
I play in Browser mode.
Thanks
Hi friends,
Somebody how I can activate Kemper Level Tuner with my pedalboard?
I play in Browser mode.
Thanks
And your "pedalboard" is what?
I have two Pedalboards, Tech 21 Midi Moose and Voodoo Lab Ground Control Pro.
If any of your boards can send midi volume (CC7) you can call up the Tuner by sending a value of 0.
I don´t have volume pedal and I don´t want to take more devices. I want to turn to one of the buttons of the pedalboard.
Thanks
The official CC# to show/hide the tuner is CC31, A value of 1=show, 0=hide.
The official CC# to show/hide the tuner is CC31, A value of 1=show, 0=hide.
Hi benvigil,
I dont´t understand sorry. How AsI have to put the tuner in a button of my pedalboard?
I do not know the steps I need to follow.
Thanks
Unless somebody that owns one of those can help out here, you will need to check with the manuals or contact Tech 21 Midi or Voodoo Labs about how to configure a button to send CC31 values.
Assign one of the buttons on the Ground Control Pro to CC#31.
Unless somebody that owns one of those can help out here, you will need to check with the manuals or contact Tech 21 Midi or Voodoo Labs about how to configure a button to send CC31 values.
I have a Ground Control Pro, give me a couple of minutes and I'll fire it up and assign a button myself to make sure it works, then I'll post a step-by-step walkthrough.
I have a Ground Control Pro, give me a couple of minutes and I'll fire it up and assign a button myself to make sure it works, then I'll post a step-by-step walkthrough.
Thanks Bro!
Okay...
First, enter setup mode (hold down the two setup buttons at the same time).
Next, hit the "Instant Access" button (#6). The screen will display 1.CHXX CTLXXX (the Xs will be numbers, mine is already programmed for my gear so the numbers mine is displaying will be different). The first number (1.) indicated button #1 on the Ground Control Pro (on the top left). Next is CHXX, which indicates the MIDI channel that button is assigned to. If your KPA is set up to receive OMNI, it won't matter which channel you select. Next is CTLXXX. The is the CC# that you want to change to 31. Hit the right cursor button to scroll to the CTL setting (it will start blinking). Use the "DATA -/NO +/YES" buttons to scroll to 31, then hit the edit button to exit.
This will assign the tuner to button 1. If you wish to assign it to another button, use the "BANK up/down" buttons to scroll through until the first number on the left of the display shows the button # that you wish to assign to the tuner, then use the steps above to assign it.