Ok guys....apologies for this but I'm short on time....I really need to read the manual !..first time gigging the KPA, I want to run an output to the main desk and another to my small combo amp as monitor.
Set the Master out to mono ?....does this give me 2 summed stereo signals ...and how do I link the vol?
Many Thanks.
master out to mono, this runs to the desk
monitor out to your combo
than you can dial diff settings for monitoring
without affecting the out to the desk
when running in an guit combo turn cab off for mon out
then the cab sim is taken out of the rig, sounds better with an guit amp
In the Output Menu, there is a page that allows the various outputs to be linked/unlinked to the Volume knob.
Here is how I have mine setup for Mains and a separate Monitor signal:
Set the Main Out to Mono. Unlink it from the Volume knob in the Output menu. This will send a signal to the PA that will not change when you adjust the level of your onstage monitor. I suggest setting it to -14db, to avoid clipping the mixer input.
Use the Monitor Out for your onstage cabinet, with it Linked to the volume knob.
Lifesavers....thanks !
You're welcome!
