Issue with Kemper Profiling Rack + Remote + Mission EP1-KP Pedal - no sound anymore, restart helped

    Hey to all,


    Two weeks ago I bought a Mission EP1 Pedal for Kemper to connect it with my Remote (on Pedal 5 input). It worked fine when testing in the rehearsal room but one week ago when I was using it live I experienced an issue at the soundcheck that I could not reproduce so far.


    I changed between some Slots in Performance Mode, Changed the Volume Up/Down (up = automatic Tuner mode) and suddenly the sound from the Kemper completely disappeard even when pressing the Volume Pedal down. There was actually sound arriving at the Kemper input (could be seen at the diodes for the Tuner) but there was no sound at all. Changing the Master Volume nob did not solve the problem, changing slots didnt help; unplugging the Pedal neither. After almost getting a heart attack I decided to just restart the Kemper. This solved the problem but I did not connect the Pedal anymore since that. I know the Kemper is a finally computer and bugs and problems can happen, but restatting the Amp during the Gig is a very unsexy thing.


    I dont know what happened; I love the Mission Pedal. I just want to ask if anyone you also ever experienced any issues with that device in Performance mode + Remote.


    Thank you so much =)
    Robert

    It could be the way you assigned the Pedal. Browse through the settings and see how its assigned to the input you are using.


    Also are you using a Kemper Remote? Are you using a RTS cable?



    My Mission pedal is plugged into the Kemper remote and works flawlessly.

    Hey, thanks for the reply.
    As I wrote in the original post I use the Remote. The pedal is connected to Input 5 using a RTS cable. I dont use the switch function of the pedal. Assignment is correct.
    The problem is: The pedal itselfs works fine. I experienced a random loss of tone after switching betweens my performances / slots. I had to restart the Kemper and the tone was back.