CC 11 is the Morph pedal in the Kemper
I have an expression pedal set up to control Morphing in several profiles
I have the expression pedal set for CC11 (morph pedal) and it sends Midi value 0 on heal down and midi value 127 on toe down, and every value in between when moving
The Morph is changing several things at once like treble and gain when you rock the expression pedal
When I use the expression pedal, the morphing works great in the Kemper
I can watch a Midi message screen and the expression pedal is sending from 0 to 127 when you move it heal down to toe down
The problem is that when I change to a profile via midi, the morph is set to it's lowest value in the Kemper
That means that the morph gain setting is at it's lowest value
I want the gain to be at the max value of midi 127 when I select a profile via midi
So I am sending CC 11 a value of 127 when a profile is selected via midi
Example:
When I call up Program change 7 (see my screen shot), I also send CC 11 a value of 127 which should make the Morph go to full on
I am watching the midi messages as they are being transmitted and CC 11 is being sent a value of 127
But the morph value is not changing when you watch it on the Kemper screen
It shows a morph value of 127, but the black bar is still set to zero
Page 5/18 in the system menu screen shows exactly what is happening as you send these midi commands (see my screen shot)
Look at my screen shot of the Kemper midi screen
Top half of screen shot
Lower left shows the morph pedal is set to 127, but it isn't
Look at the black morph bar, it is empty and set to zero
This is when I send CC 11 a value of 127 at the same time I select a profile via midi
Lower half of screen shot
Lower left shows the morph pedal is set to 127, and the black bar is also set to 127
Look at the black morph bar, it is full and set to 127
This is the exp pedal going toe down sending CC11 a value of 127
Note that CC #7, volume pedal is set just like the morph and it responds correctly on the Kemper screen
Note that all the other midi functions work properly
Volume, Wah and Pitch all respond correctly when I send midi values when selecting a profile via midi
The morph pedal is the only one that does not respond correctly
This has been like this since Morphing came out
I have updated the OS 3 times since then and it does this in every OS so far
I also attached a screen shot of the midi values being sent when I select a profile via midi
In that screen shot, I set CC 11 to toggle between a value of 50 and 127 so I could watch what happens in the Kemper
Also note that volume, CC7 is also set to toggle between 50 and 127 as a test, and the Kemper responded correctly