Volume Pedal Swells not transferring to Reamped track [SOLVED]

    Hi, I'm new to Kemper, and despite several failed attempts at the manual I am still struggling to find an answer to this, so any help at all would be most appreciated.
    My set-up is as follows:
    Kemper - MOTU 828X - Logic Pro X.
    Roland FC300 MIDI controller.


    I have created a track in Logic that contains Volume Pedal swells (via the Roland FC300 midi controller, with RIG set to Pre Stomps), but for some reason the Volume swells are not translating to the Re-amped track - in other words, when I SOLO the Re-amped track in Logic the Volume stays constant, with no swells.


    I suspect this is something quite simple - and possibly I have a total misunderstanding as to what should appear within the Re-amp track, but I am at a loss as to where to look next.
    With thanks.
    Pete
    UPDATE: I have the Volume Pedal LOCKED so as the pedal functions the same way for all patches - this is probably irrelevant, but thought it worth mentioning.

    Edited 4 times, last by Pete Fisk ().

    The volume pedal has no influence on the DI track. You need to record the volume pedal changes from the midi out of the Profiler into a midi track in logic and then send that to the Profiler while you record your reamp track.

    That seems to work hjsvheffler - it's a bit 'glitchy' at the moment, but I suspect that's something I'm doing wrong in the transferring of the MIDI.
    I have to close now, but will update the post (with SOLVED, hopefully) just as soon as I am certain I have everything correct.
    Thanks again for the help.
    Pete