Hi KPA Family, here are my next findings, perhaps useful for some of you.
As many of you I was missing Exp pedals for my KPA. So why not having a try with one of these solutions some of us use already.
So did I. Bougth the FCB and the latest UNO eprom and had my fun to find out, that these Exp pedals then had to be calibrated to send out midi signals again.
As you probably know, the UNO Chip is sold with a separate Editor SW which I highly can recommend; LG-FCB Control Center. I used it to make my first profile (see below).
Screenshot: Upper row fixed Stompboxes A/B/C/X/Mod Lower Row Prog#1-96 ExpA=Vol ExpB=Wah
Missing functions (rest of the stomps, del, rev, rot, tuner ..) I switch directly at the KPA or via my iPhone and the TB Tiny Midi solution and my KPA profile via my i-MX1 Yamaha interface
[Blocked Image: http://dl.dropbox.com/u/7554632/FCB-UNO-KPA.jpg]
But for everybody who wants to startup with a solution and not with a challenge I will provide to you a suitable dump to start with.
Here the dump for LG-FCB Control Center or other solutions handling that format FCB UNO KPA profile.
And here the sysex dump file received by the free Java Editor Solution for the FCB1010
Ripwerx Editor voila FCB UNO KPA profile sysex file ZIP
Besides, I connected my iPAD with TBSTUFF to the MIDI THROUGH, so I have all options available, NRPN included.
Do not forget just in case the EXP pedals do not work to do the FCB ...
Calibration on Youtube in German
Calibration on Youtube with Eureka Prom in English
Often discovered problem after unpacking the new FCB 1010 the 1st time or change of the PROM chip.
Finally it helps to have a look into the Uno Manual or to walk through the Idiot's guide here
Have fun.
Geht nicht, gibt´s nicht. "Doesn't work" is no option.