Hi Everyone,
I'm new to the Kemper community and just recently purchased a KPA non-powered toaster and hoping that someone here may be able to offer me some guidance regarding using the Midi Commander foot switch with the KPA.
The Midi Commander comes with a KPA host mode. When I activate this mode, the Midi Commander allows me to toggle up and down between profiles (using the UP/Down buttons and A-E buttons) just fine. However, when I hit any of the buttons (1-4) for the effect switches, the Kember gives me a message saying "bank is empty".
I tried going a different route trying to use one of the Custom settings that would allow me to assign the appropriate midi numerical effect switch commands (from the Kemper manual) to each button ( A=17, B=18, C=19, etc...). Well, this worked perfectly to allow me to toggle the effect switches on/off. However, the weird thing is that when I toggle up and down to change the profiles (in performance mode) the number on foot controller does not match with the profile number on the KPA. For example, the very last profile that I've saved to in the performance mode is in slot number 8. However, in order to get to that profile on the foot controller, I need to get the Midi Commander to slot number 10 (while the KPA still shows the profile in slot 8). Does that make sense or is that clear as mud?
I'm completely baffled and not sure how to resolve this issue. Would greatly appreciate some assistance from any of you who have experience with the Midi Commander.
Kind regards,
Fred