... I mainly would like to switch the LED Off
Stefan
Please bring back the separate brightness adjustment for the TAP LED
-
It's probably not exactly what you'd like, but you can turn it off per rig if helpful.
On the RIG settings you can click the Tempo button to set it as disabled.
-
I would like to still use the TAP button and the Tempo within a rig.
I just want to switch the TAP LED Off or lower the brightness.
This was possible in previous releases, but was changed in 9.x release
Now the TAP Led follows the generic LED brightness
-
+1
-
That flashing runway light was driving me crazy but since I rarely use the tap tempo function (and don't need a flashing LED to assist me when I do) I put a small piece of electrical tape over it. Problem solved.
-
It would be nice particularly on the stage to have a bit more zone control over LED brightness. Example: Number lights independently
-
That flashing runway light was driving me crazy but since I rarely use the tap tempo function (and don't need a flashing LED to assist me when I do) I put a small piece of electrical tape over it. Problem solved.
Kemper Team , please, please allow to switch of the TAP LED !!!
The flashing LED wit a random frequency drives me also crazy !!!
-
last time i checked, the brightness control for tap was back in system settings. (Os 10.2)
but it only controls the led on my toaster, not on the remote.
a " include remote" softswitch would be very welcome
-
Kemper Team , please, please allow to switch of the TAP LED !!!
The flashing LED wit a random frequency drives me also crazy !!!
Sorry for being imprecise, I am talking about the Profiler Stage. The TAP LED Brightness setting ist still available in the System Settings, but has no effect.
