I am ordering this product from Thomann:
LEFT]Harley Benton PowerPlant ISO-Adapter 12[/LEFT][LEFT][Blocked Image: https://thumbs.static-thomann.de/thumb//bdbmagic/pics/prod/482907.jpg][/LEFT]
Of course, if a Euro plug isn’t suitable to where you live, you would need an adapter, which isn’t hard to find.
Another forum member seems to have found a product at Sweetwater in the US. I can’t attest to that.
You need a unit that supplies 12v 2000mA or 9v 2700mA, 5.5/2.1mm center-negative plug. An adapter that will power a Neural Quad Cortex would likely work for our Kemper Profiler Players, again according to specs.
In my studio I power the KPP using a CIOKS DC7 with CRUX adapter. It has proven to reliably power the Player over extended periods of time.
Trutone 1Spot works perfectly.
I used a laptop charger and adapter to reverse the polarity. More robust and much longer. I have never used the stock one
Trutone 1Spot works perfectly.
But that's 9v. Isn't it supposed to be 12v?
Or do you mean the Spot Pro power bank?
But that's 9v. Isn't it supposed to be 12v?
Or do you mean the Spot Pro power bank?
No I mean the original 1Spot. It works fine.
bca_100 I couldn’t see detailed specifications of the unit itself on Amazon Spain (the fact that I don’t speak Spanish undoubtedly didn’t help!), but I did check the Harley Benton pedalboard power unit it is meant for, the PowerPlant ISO-1 Pro. This system demands a 12v 2000mA supply, which is the power required by the Profiler.
In other words, it seems this would be fine. I suggest verifying that the DC output plug is 5.5/2.1mm. I did see that it is center negative.
bca_100 I couldn’t see detailed specifications of the unit itself on Amazon Spain (the fact that I don’t speak Spanish undoubtedly didn’t help!), but I did check the Harley Benton pedalboard power unit it is meant for, the PowerPlant ISO-1 Pro. This system demands a 12v 2000mA supply, which is the power required by the Profiler.
In other words, it seems this would be fine. I suggest verifying that the DC output plug is 5.5/2.1mm. I did see that it is center negative.
I will give it a try. I can return it anyway.
The 1Spot is much more expensive.
Thanks!
bca_100 I couldn’t see detailed specifications of the unit itself on Amazon Spain (the fact that I don’t speak Spanish undoubtedly didn’t help!), but I did check the Harley Benton pedalboard power unit it is meant for, the PowerPlant ISO-1 Pro. This system demands a 12v 2000mA supply, which is the power required by the Profiler.
In other words, it seems this would be fine. I suggest verifying that the DC output plug is 5.5/2.1mm. I did see that it is center negative.
Practiced with it for 2 hours yesterday, worked perfectly. Thanks!
This one does the trick...verified from Kemper Support as well.
https://www.sweetwater.com/store/detail/QCPwrSupply--neural-dsp-quad-cortex-power-supply
This one does the trick...verified from Kemper Support as well.
Except that this is the world's most flimsy power supply. It's what all of us QC owners want fixed. It's pathetic.
You can find compatible third-party ones online. Just make sure it matches the voltage and amperage specs of the original.
I’ve got a pair of these en route to me:
8.32 EURO
Now that my Thomann order has arrived from Germany, I can report that the following unit reliably powers the Player and is well made:
At a fraction of the cost of the Neural DSP Quad Cortex power supply, and from what I gather, better build quality, this is a great deal.
