I have tried four times to update from 1.5.2 with no success. I downloaded the file twice and tried two different USB sticks. I have 390 rigs on the KPA.
Anyone have any suggestions?
Update to 1.6.0 Beta Fails
- paltomare
- Closed
- Thread is marked as Resolved.
-
-
I have tried four times to update from 1.5.2 with no success. I downloaded the file twice and tried two different USB sticks. I have 390 rigs on the KPA.
Anyone have any suggestions?Update to 1.5.4 first then to 1.60. This should work
-
I have the same problem, but I have resolved it in the following manner:
I,m was happy with my 1.52 version KPA with about 760 rigs on it.
Like I have read in this forum somewhere, first I have updated it to version 1.54 succesfull, and after that I have tryied to update to 1.6 without any succes.
It gets to 100% of the process and then update was failed.
After trying a few times to update to 1.6 I have returned to the version 1.52 which was succesfully installed.
Now I was stopped the KPA and waiting a few minutes.
In next step, after restarting the Kemper I was trying to update from version 1.52 to 1.6, and...what a surprise: it was working!!!.....but after the updating process my nice little Kemper won't start again.......
I have stopped it again and after a few minutes I've tried to start it with booting from USB stick with the new firmware.........and like a wonder it was started and it,s working fine and sounding perfect now with the new software version and the new rigs....
I hope that this is working for You too!
-
Thanks guys I'll give this a try.
-
Thanks guys I'll give this a try.
I'm at 1.5.4 and can't get to 1.6 despite multiple USB sticks and downloads.The process gets to 100% and then fails "Update has Failed. There was a problem reading update data" ...
Hoping to use the same USB stick I've dedicated to the Kemper for several months and I've done about 5 updates with no problem prior to this
I might try to go down to 1.5.2 and then back up again.
-
i just made a big cock up i answerd this post by clicking on the report button by mistake sorry to all for that im losing it..
ill try againTry backing up your USB stick to Pc/ Mac then format the Stick on the KPA, then copy back files other than the update Kaos.bin.
Download a fresh copy unpack and copy the files to your USB stick and try loading again.
This worked for me -
Using the KPA to format the same USB I've used for upgrades and trying again to upgrade from 1.5.2 to 1.6.0 did not work for me.
Upgrading from 1.5.2 > 1.5.4 > 1.6.0 also did not work.Edit:
Success!
Downgrading back to 1.5.2 from 1.5.4 then trying 1.6.0 again worked.
I do notice that the "Last Imported Rigs" do not show the most recent rigs I had imported but do show a list of imported rigs from a while back.
No big deal since the new rigs are there when browsing "All Rigs"
Thank again for the help! -
Using the KPA to format the same USB I've used for upgrades and trying again to upgrade from 1.5.2 to 1.6.0 did not work for me.
Upgrading from 1.5.2 > 1.5.4 > 1.6.0 also did not work.Please report this to support. Include a backup and the exact error message (btw what did it say?).
Timo
-
now i dont see any rigs anymore after downgrading from 1.5.4->1.5.2
How to reset correctly?put chickenhead on browser and press&hold system button right?
-
Please report this to support. Include a backup and the exact error message (btw what did it say?).
Timo
Finally had some success, see edit above.
Prior to this the process would get to 99% and then fails "Update has Failed. There was a problem reading update data" ...
-
i have the excatly same issue
-
okay im back in rig menu and now i try to update 1.6.0
now all is fine,