Thanks! I would then need to make those Main Out mono.
? Doing W/D/W the Wet part is Stereo...not Mono
Thanks! I would then need to make those Main Out mono.
? Doing W/D/W the Wet part is Stereo...not Mono
As Kellerblues said, the mix knob does that already. The Kemper compressor is based on the Dynacomp/Ross pedal compressors which I don’t really like so an improved compressor that could mimic something like my Cali76 would be very much welcomed though but the mix control already facilitates parallel compression.
That's why I have a Cali76 on my satellite board
You need to do it the other way around:
Main Out = Dly/Rev Wet
Monitor Out = Mod Mono
That's exactly what the Mix parameter does
Monitor Out Cab Off ticken in den Output menu, Monitor out eq anpassen. High cut beim 6-7000 Hz, Low cut bei 120Hz. Sollte reichen als Startpunkt, dann anpassen bei Geschmack
From Rig Manager go to Kemper Factory Content, all there
You can download it here
i don´t think so, but isn´t it always loading the last performance you used?
Yep, it does
There is the Touch mode in the Wah that triggers it as an Envelope Filter would
Can I simply tear them off the Player?
Don't! Screw them off, remove them and put the screws back in. I did it with my Stage to mount it on a Temple Audio board
+1...where is it now?
do not feel any « click » as with usual effect pedal
And it doesn't, it's a latching switch. You need both cables connected and you have to assign the toe switch to the block (typically A) where you put the Wah. The assignment is global, for all rigs. You need as well to assign the kind of switch to the pedal input you connect to.
Kemper takes pedals like an amp. No reason it shouldn't work "properly"
Session und Live player hier. Der Kemper Stage hat mein Leben soviel einfacher gemacht. Ob es Zeitgemäß ist, ist meine Meinung nach nicht die richtige Frage. Die Frage ist ob es macht was man braucht und wie, und die Antwort lautet: besser geht kaum. Letztendlich dein AC30 ist von 1962...
Use the Single Delay, cut the highs at 3kHz and add a little warble. Should get you in the ballpark
Do you mean Pan Tremolo? Should be added in the upcoming v11 firmware update
Bella versione e bel cane. The baby just chills and enjoy the entertainment
Many channel strip and studio preamps are available on RE.
in Performance Mode tap on the desired switch, turn the Browse knob to select the Rig, press Store (3 times).
Repeat for the other switches.
In Browse mode you can't
Performance and Browse are 2 separate memory pools (basically copies)