But short of a full editor, Id perhaps like to see an XML, or CSV , or txt extraction tool for the *.kipr files.
+1 Great idea
But short of a full editor, Id perhaps like to see an XML, or CSV , or txt extraction tool for the *.kipr files.
+1 Great idea
I do recall a Bad Kitty profile ...
I manage a few Guitar related forums myself
And as a member of vguitarforum, I can attest to it being an excellent one
The UNO chip enables the FCB to operate in two modes: down row is for preset switching, upper row is for stompbox switching.
You can order the Sporn directly at the developer (http://www.ossandust.be/).
It's verbs Easy to apply the UNO Chip to the FCB. I've done it twice.
Thanks!
I was thinking of buying an FCB1010 that's available used, but have no familiarity with a MIDI controller. For example, what is the UNO chip? Is there something I should be looking for in this unit before buying it? If it doesn't have the UNO chip, what does it take to upgrade it? Thanks for any help!
Steve, you might like this article. I wrote it a few weeks back in an attempt to figure out what the limitations of the KPA cabs are, and I think this might be your type of thing. PM me if you have any questions.
http://dallashodgson.info/articles/Kempe…/whitepaper.htm
Holy mackerel. I have enough trouble just trying to play the guitar!
and at my advanced age
Advanced age?!!! Hey, you're just a youngster!
Wrong calculation, that makes it 160% realer!!!
I can only work from my own experience, and I like the results I've gotten using two different mics. I'm sure it depends on the mics, etc., though.
Edit: problem solved. I'm a dumbass
Wrong routing on the audio interface.
Hey, I know how you feel. The more options you have in configuration, the more ways you can screw it up!
Display MoreHi Tyler,
I have yet to profile an amp using more than one mic. For now I only used a SM57 and tube mic preamp into console into Kemper.
I do not really understand the concept of mixing different mics during a profiling process.
Mixing microphones whilst recording is studio routine, it is used to get a different sound, sort of used to EQ the signal from the cabinet by using different mics and mixing the different frequency responses of the mics.
This might be IMHO a bit too much info for the Kemper. I assume the Kemper "records" the frequency response of the whole system: Amp, cabinet, mic, mic preamp, mixer. So if there are two mics mixed, the Kemper calculates a mix of the freq response of those two mics (phase cancellations and all). Which of course might be something very different from what we hear in real life when mixing two mics.
I tend to think that profiling should be rather explored using a single mic and maybe different types of mics.
Dote
I've had good results using two mics to profile: Shure SM57 and Shure SM86. I run them into a Mackie mixer then into the KPA. It just seemed to me that mixing different tonal characteristics would result in a truer sound, but I'm sure no expert!
Welcome!
PS: Very nice playing as well!
+1 Great job!
Yes I noticed that weirdness as well. The gain will jump up like 4 leds.
BUT I love your profile!
The compressor is set a bit hot on the volume.(Its at max now!)
It sounds very real here.
Thank you, its a favorite of mine.
Bill
Bill, thanks for the compliment. You might like my Polytone profiles as well.
http://dl.dropbox.com/u/690187…20%20%20%20%20%20%20.kipr
Excellent. I'm not sure which one you renamed (or if you renamed both of them), so I'll just rename them both. Thanks again!
Sorry, I missed your first post. How are your rigs named?
No problem, and thanks for the help. Here are links:
http://dl.dropbox.com/u/690187…MARSHALL-JTM30-CLEAN.kipr
http://dl.dropbox.com/u/690187…MARSHALL-JTM30-DRIVE.kipr
If you load the clean first it works great. If you load the drive and then immediately after it load the clean, it's corrupted. If you load anything else between the two, then it works fine also. Strange stuff. Thanks again!
Hi Elantric. I'm 727Lawrence on Vguitarforum. I'm a new owner as well of the KPA. Nice to see you here!
Welcome! Your English is fine. It's certainly better than any language I can speak other than English
Wow, no help at all? Does anyone from Kemper monitor these posts? I can't rule out that something I did caused this, but it sure seems like a software problem ...