Posts by waraba

    I dig the internal KPA's pedals, I've been trying a few in front and could not really tell the difference. Don't forget the RECT and BIT pedals as well they are very useful for hendrix and other dirty tones. I'm still waiting for a few more models


    I even took an experiment with just the green screamer and a CAB without any amp profile or EQ and it turned out very good :


    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    Sure : the octaver tracks well on single notes , it won't do miracles but it works on a mix. The best use I fount with it is to use a regular single coiled strat , it will sound like a precision / jazz bass depending on the PU.


    I've uploaded a fairly good one times ago : I use it a lot on my mixes.


    Mr DAKOTA BASS OCT

    the drive and lead tone demo from the single coil pack is UP !


    It's pretty raw as I used no EQ in my DAW to get you the real tone.


    All tracks played on my strat, enjoy the end strat lead bluesy tone : I'm not the best lead player here but it's a very cool profile..


    the punk rock track was played with the lead1 tone, delay disengaged.


    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    here is the demo for the upcoming humbucker pack


    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    This pack will be available very soon !


    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    Here is the first pack of a full guitar matched collection of profiles I'm working on for several weeks now.


    Theses rigs will all have the same base : a great russian little preamp called AMT SS-11 ( full tube 2x12ax7 ) and a great JTM cab that I used for merging, the results were tremendous so i decided to go for a commercial offer. Don't be fooled by the fact this gear is so small and not more than 350€ , the tones you get from these profiles are on par with lots of commercial offers.


    For the launch of my web store I will offer a great intro price, for the next weeks. We start with the single coil pack, best suited for strats, teles and splitted humbuckers. I will offer later 3 other packs for Humbucker guitars, P90 ones and a special hollowbody pack.

    >> HERE IS THE STORE <<


    I have two demos from the SC pack :



    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.


    External Content soundcloud.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.





    content of the pack :


    9 direct profiles & 14 merged profiles (JTM cab):


    -dry clean
    -full clean
    -bright clean
    -dimed clean
    -jazz
    -voxy
    -crunch1
    -crunch2
    -crunch3
    -drive1
    -drive2
    -Jimi
    -lead1
    -lead2


    here are a few details about the content :


    Please find the direct input files in their own folder. These are RAW untweaked profiles. All merged rigs were directly made from these profiles by matching a great JTM cab and tweaking them.


    You'll find a good selection of FXs on each rig, in their own context. Most cleans include a dist stomp to switch from clean to lead on the same rig. On crunches and drives the dist stomps are mainly used to change the color of the drive. You'll find a compressor if needed and a special EQ designed to clarify the tone a bit more : it will remove any boomynes and boxyness.


    dry clean : best suited for very clean parts where the guitar cuts the mix - takes FX very well - great for recording, blues


    full clean : favorite among beta testers, this one sounds really great and open on it's own, great for live & chording and all sorts of tones - Be sure to play around with your guitar vol pot on this one.


    bright clean : specially designed for fast funk chording with treble enhanced. Cuts the mix pretty well


    dimed clean : this one is used for blues or jazz, for riffs, leads licks and darker chordal work


    jazz : similar to dimed and optimized for jazz guitar with specific tone stack and FX.


    crunch1 : lots of personality in this one, fender territory for all kinds of tones : blues, rock'n roll, funk ... Adjust the gain until you get a satisfying crunch


    crunch2 : a bit more driven and a bit more tailored for leads, but will still allow strumming


    crunch3 : another color in crunch


    drive1 : cranked amp rhythm or lead tone, lots of growl and a typical 70's soul. Up the gain to get the needed drive


    drive2 : lots of overdrive on this monster, the most modern tone you'll get from the AMT. Do not touch the gain on this one : it's much better to adjust the guitar volume instead. This way you'll lower the drive AND keep the great punch.


    Jimi : this one is designed to mimic super-cranked Hendrix's tone, while still having some great clean rhythm with a low volume pot on the guitar. Best used on a neck start pickup. Included FX are 2 types of dist.. pedal (they also work together) and a great rotary sim.


    Voxy : typical vox vibe perfect for old time rock'n roll and early Who/Led Zep stuff, also great for blues.


    lead1&2 : full, warm, articulate and punchy, very similar to boogie mark series lead tones. If you lower your gutiar vol pot you will travel in time : 8/9 90's , 7 80's , 5 70's ...

    The pack goes online tonight !



    here is the final notes coming with it ;


    the single coil pack is suited for strats, teles and all splittable humbuckers. It won't produce good results on Humbuckers due to all SC tweaks I took.


    DISENGAGE ALL stomps FX and post FX locks to get the best tone. Most rigs are already tweaked, you'll just need to adjust the volume pot on your guitar or the kpa's gain pot if specified.


    Content of the pack : 9 direct profiles & 14 merged profiles (JTM cab):


    -dry clean
    -full clean
    -bright clean
    -dimed clean
    -jazz
    -voxy
    -crunch1
    -crunch2
    -crunch3
    -drive1
    -drive2
    -Jimi
    -lead1
    -lead2


    here are a few details about the content :


    Please find the direct input files in their own folder. These are RAW untweaked profiles. All merged rigs were directly made from these profiles by matching a great JTM cab and tweaking them.


    You'll find a good selection of FXs on each rig, in their own context. Most cleans include a dist stomp to switch from clean to lead on the same rig. On crunches and drives the dist stomps are mainly used to change the color of the drive.


    dry clean : best suited for very clean parts where the guitar cuts the mix - takes FX very well - great for recording, blues


    full clean : favorite among beta testers, this one sounds really great and open on it's own, great for live & chording and all sorts of tones - Be sure to play around with your guitar vol pot on this one.


    bright clean : specially designed for fast funk chording with treble enhanced. Cuts the mix pretty well


    dimed clean : this one is used for blues or jazz, for riffs, leads licks and darker chordal work


    jazz : similar to dimed and optimized for jazz guitar with specific tone stack and FX.


    crunch1 : lots of personality in this one, fender territory for all kinds of tones : blues, rock'n roll, funk ... Adjust the gain until you get a satisfying crunch


    crunch2 : a bit more driven and a bit more tailored for leads, but will still allow strumming


    crunch3 : another color in crunch


    drive1 : cranked amp rhythm or lead tone, lots of growl and a typical British 70's soul. Up the gain to get the needed drive


    drive2 : lots of overdrive on this monster, the most modern tone you'll get from the AMT. Do not touch the gain on this one : it's much better to adjust the guitar volume instead. This way you'll lower the drive AND keep the great punch of this typical Marshall tone.


    Jimi : this one is designed to mimic super-cranked Hendrix's tone, while still having some great clean rhythm with a low volume pot on the guitar. Best used on a neck start pickup. Included FX are 2 types of dist.. pedal (they also work together) and a great rotary sim. Favorite amongst the beta testers


    Voxy : typical vox vibe perfect for old time rock'n roll and early Who/Led Zep stuff, also great for blues.


    lead1&2 : full, warm, articulate and punchy, very similar to boogie mark series lead tones. If you lower your guitar vol pot you will travel in time : 8/9 90's , 7 80's , 5 70's ... You'll also get great modern US rhythm driven tone by removing the delay and lowering the vol pot. on the guitar