Great great news !
I wonder if some of you already tested the app with an USB to midi adapter since my sound card is not equipped with midi.
[Blocked Image: https://images6.static-thomann.de/pics/prod/189138.jpg]
Great great news !
I wonder if some of you already tested the app with an USB to midi adapter since my sound card is not equipped with midi.
[Blocked Image: https://images6.static-thomann.de/pics/prod/189138.jpg]
I had the same feeling, it's probably due to the remote , but then why not get the new option set by default and leave the option in the sytem menu for old method ?
I got the same issues, I can hear my LAPTOP CPU cycles thru my monitoring system with SC pick ups , I wonder what I can do , ATM I stand away from my laptop and the noise gets away.
Is There a way to shield something ?, I use shielded jack between my soundcard and monitors ( Maybe I should swicth to xlr ?)
Maybe it comes from the SPDIF connection ?
The direct edit mode is gone ( we used to select the FX & amp edit mode with a specific choice in the system menu 'direct edit' )
This mode is no longer available But the new one is killing my workflow while editing FXs and amp parameters.
I use to edit my rigs on the fly while recording , switching FX , editing them , go back to amp parameters and so on , the new mode is unatural to me.
the old way was much better for me since you could go from amp editing to FX editing with a single long press.
Single short press for activating FX or amp / cab section
Long press for editing
Please comment if you agree with the above, I don't think I'm the only one.
that's a fine one LOL
But for me the disappearing of the direct edit mode does not pass end user regression test ---> ROLLBACK
After extensive testing I must say that I much prefer the old selection and editing method which was much more natural for me (and we had the choice of editing mode , which is no longer the case now).
This also applies to amp & cab editing. It's now much of a hassle to edit , exit and select FX or amp parameters.
I record a lot and do lots of editing 'on the fly' when recording a track , and the new mode is slowing my workflow , especially when going from amp editing to FX editing : it now requires to press exit button while the old method just need a single long press (edit) or short (activate).
Is there any chance we get back on previous editing mode as an option , like it was on previous firmwares ?
Sadly It won't hum, scratch and get you into electric shock like your vintage tube amp : it's safe , noiseless & hyper clean.
More seriously it lacks a spring verb , but it will eventually come with a firmware update.
Great hack & Fantastic story man !
Yeah killer tone on the tele , the best matching guitar for most rigs on the KPA IMO.
I second that, I did a test on rigs 01 (clean) and 13 (with maxon OD) are my favorites (merged profiles) . This is a superb profiling session, you totally nailed the silverface jangle on these, I could'nt stop playing the Fender, they also take FX superbly well, including the boosts. The cabs on the merged are really good, this is not often the case on fenders. This is very close to M Britt's profiles as another user said.
An awesome work, you should upload some of them on the RE , they are also well tagged.
Here is a smooth one , in a soul/jazzy vibe, I'm gathering ideas and tones for a jam.
Lots of clean stuff inside, on a jazzbox and a solid body.
Strange ! you should plug the controller pedal in the other plug , and re-init it as a wah control.
Then choose a rig with a distinctive clean vs driven gain in order to feel the difference better.
If it's still acting as a vol pedal, you may have a corrupted setup , I did encounter the problem once or twice.
Al rite, let's try this option , I never used it in the past, since it doesn't look badass enough
thx to all for answers
OK no probz Don , bye bye 'Hendrix edit mode' - I used to set up the Trem rate or chorus depth by hand sometimes.
I'm on the way to get a FCB , but I liked the fact having to go to a gig by foot , with just my guitar & KPA on my back.
Yes having to press exit is a pain to me , especially live, I'd like to have the choice I had on previous releases, this was very convenient.
They won't be available on Rig EX, some morons constantly rated his rigs with 1 star, what a pity...
I cannot understand people doing this, and acting so stupidly. My approach is to get a positive critic when some aspects of the rigs don't suit my tastes, and give a very high vote when I really like a rig.
Profiling takes lots of time and blast your ears & gear , theses efforts have to be taken into consideration
Thx mates, it's a pity that this feature has disappeared. I have a live gig Friday and no pedalboard , I used to switch my FX by hand (sustaining a note by left hand and switching the FX with the right hand, Jimi Hendrix style !!!)...
I have to test furthermore and see if I'm able to switch FXs live.
hmm here is my setting :
1:pedal type 1 Wah Wah
2:pedal off
Pedal 1 is set as expression (type1) while 2 is off
Init pedal 1 and check for a value change when you toe.
I also have the WahPedal to vol UNchecked (on page 9)
be aware that a massive gain increase acts also as a vol boost, not only drive, but if you're going for a 12db boost, you'll be able to go from clean to lead with the wah booster, a fantastic feature.
it's already here, just set your max gain with the gain knob, adjust the wah booster to MINUS 100, then you got unboosted at heel up and boosted at max down , with all the intermediate variations between...
BTW this is the best way yo test the gain range on new rigs, just lock this wah booster on a slot and browse a selection.