i created a folder under "my local library" to audition, then i tried draging the rigs from that folder to my profiler, i didnt work well so i tried draging them from were i have them stored, but same result
Posts by Alejandrocarrera
-
-
i just dragged the rigs into the rig manager inder under "my profiler" folder like i always, but the rig didnt store, it appears there but nothing loads, when i restart the profiles the rigs i dragged arent there,
-
I'm using a Kemper Toaster, last operating system and rig manager version. When i audition a rig on my computer i get the sound right but when i drag the rigs to my toaster in the rig manager i can see the rigs in the kemper and there's a message on the toaster that says transferring rigs but when i click on the kemper rigs that i imported I the rig doesn't load, it stays on another rig i had, when i turned on and off my toaster there were no new rigs so it looked like the rigs transferred but they didn't, any way to solve this?
-
i was at a gig and i send main xlr to FOH, then "L plug output " to mono cab off to my Amp, and i wanted to send another line with speaker on to my personal in ear system but "R plug output" had cabinet off so i tried using Headphones output but it was giving me lots of noise.
If you make indepent "Cab Off" for the plug outputs it would rock! i always use them in Mono.
thanks!
-
I found out, i was going to do a video, when the middle rig (3) button lights white you're on "E" if the rig button 2 and 3 lights up, you're on Eb, if rig button 2 light up alone you're on "D",
When you tune the other strings of middle rig (3) lights up then your on standard tuning, if you're tuning 5th string it detects A and lights yellow , and for Ab same as I explained before. It's the same with all strings, so Kemper does detect the note and interpret it as lighting up rig buttons as reference, I stopped using a my clip poly tune after figuring out this
-
i use lock for reverb always on my kemper stage, would be great to have that function on the player
-
6 LEDs blinking red could inidcate a software issue. In that case please approach our support organization here. They know how to read out the error code.
thank you very much, everything seems fine, if it happens again i will contact support, appreciate your help
-
What it means depends on the number of red blinking LEDs.
oh, looked like half of the leds were blinking red that time, but havent happen again
-
-
Hi i have been wondering which button is "Effect Button IIII" i know effect button i, ii, iii are 1 2 3 main buttons but i'm wondering which button triggers effect IIII, cant find the info. Is IIII for midi only ??? Thanks!
-
I used my Kemper Player for a Gig for the first time. When i was at sound check after a few minutes of turning it on half of the leds started to blink red and there was no sound, i didnt know what that mean so I turned it on and of and everything was fine, just wondering if it happens again what does it mean, does anyone know?
thanks in advance
-
i use lock funcion always on my kemper stage, i have always Reverb on "lock" so depending on the venue i adjust it
also output EQ, would be a great add
-
Your Performances are included in your KPA USB backup and can be imported without Laptop or Computer.
You can also open multible backups in RigManager and load Performances into your Profiler to edit new Performance sets...
thanks but i dont want to replace all the rigs on the other kemper, just add a performance without the need of a laptop, that would be convenient
-
This would be very useful, you will be able to import your performances via usb without a laptop/desktop computer
-
Bravo - that's a great tone you got too.
thank you very much!
-
I just uploaded November Rain from Guns N Roses (Guitar Solo), used a Josh Middleton profile, hope you like it!
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
I made an IR shootout of John Petrucci's IR collection Vol 1 from Tone Mission, hope you find this useful
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
just put kaos.bin in rootfolder (=topmost folder) of the USB stick, and it should update normally from the USB stick
thank you very much, its updating now! greetings!
-
hi, i was updating with USB and the power went off in the middle of the update, not when i start kemper stage i get this message:
nanoboot: furmFromUSB()
ERROR: unable to locate firmware file on USB device
failed to update firmware
i already check and the koas.bin file is in its folder on the usb,
-
prolly the signal into the Behringer P2 is clipping, i used to have shure psm 200 wireless sytem , the input signal alway was super hot, so i had to turn the gain knobs on the channels down a lot, i recently bought a sennheiser ex iem g4 and everything works great! i also switched in ears because the ones that i had were kinda cheap and kemper sounded to harsh, i get a better sound now, i'm aiming for UE in the future, greetings