Am besten schickst du eine Email an
[email protected]
Posts by Kemper Support #1
-
-
Panorama ist ein Rig Parameter der für jedes Rig einzeln eingestellt werden kann/muss.
-
Wenn das nur bei bestimmten Rigs der Fall ist schalte doch bei denen mal testweise alle Effekte ab und stell sicher dass keine externen Effekte im Loop sind.
-
Die Stereoverteilung kann mit dem Panorama Parameter im Rig Menu geregelt werden. Wenn der in der Mitte steht sollte das Signal an beiden Ausgängen gleich laut sein.
-
does the sound disappear the more the pedal is pushed towards the toe position?
This is a side effect of extreme range settings in the wah effect. Try loading one of the wah presets (WAH CryBaby) by turning the browse knob to the right while you are in the wah edit screen. These have range settings that will produce an audible result in any position of the pedal. -
only the xlr outs in the Profiler provide a balanced signal. All of the TS outputs are unbalanced.
ANALOG OUTPUTS
Master L and R Outputs:
XLR balanced, ¼ inch TS unbalanced with ground lift max. output level: XLR +22dBu, TS +16dBu
Monitor Output:
¼ inch TS unbalanced with ground lift max. output level: +16dBu
Direct Output/Send:
¼ inch TS unbalanced with ground lift max. output level: +16dBu -
If you want to use a buffer of 1024 samples you should use the zero latency monitoring function that your interface probably offers.
Software monitoring is only usable with buffersizes of 64-128 samples. -
Have you checked the volume pedal settings for the rigs in that performance? If you have not activated the vol ped lock option on the volume oedal settings page each rig will have its own pedal range setting. If that value is set to 0 the volume pedal will have no effect.
If you cannot figure it out you should send an email containing a backup of your Profiler to [email protected] -
I never got a reply yet from Support.if you received the auto reply please let me know the ticket number and i will look it up.
-
Ich glaub da muss man das File zuerst auf name.Zip oder .rar umbenennen und mit WinZip oder ähnlich extrahieren. Da findet man dann in der Directorystruktur alle Presets.Profiler auf Browser(mode) einstellen USB Stick bei laufenden Profiler einstecken. Dann erscheint ein Menue, dass weiterhilft.
Der Factory Content 5.1 liegt bereits als Zip File vor. Man braucht das Archiv nur auszupacken und hat sofort Zugriff auf die Unterordner mit den jeweiligen Inhalten.
-
Du hast Stomp Presets gelöscht. Stomps kann man nicht löschen. Um die gelöschten Presets wieder in den Profiler zu laden hast du 2 Möglichkeiten. Du kannst entweder die Factory Content Funktion im System Menü verwenden oder die den Factory Content 5.1 von der Webseite herunterladen und dann die Stomp Presets aus dem Download in den Shared Ordner eines USB Sticks kopieren und dann mit der Import Funktion im Profiler importieren.
Bei der ersten Methode werden allerdings alle Rigs, die du bereits verändert und gespeichert hast erneut in ihrem ursprünglichen Zustand hinzugefügt.
Bei der 2ten Vorgehensweise werden nur die fehlenden Presets wieder hinzugefügt. -
Etzeljupp-es ist genau umgekehrt-mit Type werden die grundsätzlichen Effekttypen geladen und mit Browse die Effektpresets.
-
Due to technical reasons there is no Git/Master mono option for the SPDIF output source.
-
Each output source setting is independent from the others. If you select Git/Master Left you will get just the left side of the master signal.
-
My problem is, that the kemper is just not big enough, I need to play on 7 with 10db boost so I can hear myself properly and feel the sound, I also got mesa TC 50, I use that on 3 from 10 and it's so big and loud that it makes me think about selling Kemper.
Please check the volume settings for the monitor output in the output menu. The factory defaut value for that is -12 dB.
-
You can control the output level for each of the outputs independently in the output menu.
-
you can temporarily call up the tuner by putting an expression pedal that is configured to work as a volume pedal into the heel position. Another option is to connect an analog foot switch to the Profiler to call up the tuner mode.
-
simply follow the instructions in the chapter called "setting up performances" on page 159 in the reference manual that you can download for free from our website.
-
Please contact our support team by sending an email to
[email protected] -
the bank select and program change number for every slot in a performance is shown in the lower left corner of the Profiler display.