Performances kann man nicht löschen. Es existieren immer 125 Performances. Du kannst nicht mehr verwendete Performances allerdings überschreiben.z.b. mit der "new Performance" in der nur in Slot 1 das Crunch Rig geladen ist.
Posts by Kemper Support #1
-
-
check the value of the return level parameter. If it is set too low you will get that error message.
-
i am not familiar with the interface you are using but it should be a parameter in the control panel that you use to setup the routing for your interface.
-
Is your interface set to be the clock slave? If it is not you will get clicks and pops due to sync errors.
-
I would like to see categories too. All Marshall in one, 5150 in another etc.
Amp/Cab is already available as a sorting criteria
-
--------------
Found it! I didn't see before than Sort by Author had other options for sorting including by Gain. And the mark as Favorites is available once you use the Rig button to edit. I wish the External Storage button in the Browser was in the System area and it was a Mark as Favorite button instead since that's something I'll be using all the time in the Browser.
There are a lot of functions that aren't where I'd guess they'd be.
you can press the RIG button for a second or two to mark a rig as a favourite
-
this has been possible since day one in the Profiler
-
does this only happen when you use RM or also when you use the browse knob? If it happens when using RM please send a report using the feedback function in RM.
btw you can use a USB keyboard to input slot names on the Profiler. No need to use the browse and type knobs for that. -
I’ll check both of these things. It does seem like the default Crunch Rig is sounding when it clearly says the name of whatever rig I copied. I’ve re-read the manual a few times, but confirm the steps just using the profiler for me.
- Go to Performance mode
- Turn Browse knob to find desired rig
- Tweak as needed
- Save Performance
so the rig still sounds correct after you load it into the slot using the browse knob and only starts sounding different after you stored the performance? Are you using the Remote to switch to a different slot before storing the performance? As Musicmad mentioned this is a no go because it will undo all of your previous actions.
-
check your lock settings. They are independent in both modes. This includes the parameters in the input menu.
-
your assumption is wrong. You cannot send program changes with the effect buttons. Instead you can send two program changes with each of the 5 slot switches.
No need to return the Remote. -
how are you monitoring? From your description it sounds like a phase problem which can be caused by faulty headphone plugs or cables.
-
simply select a different destination in the store menu to save a copy of the performance to a different memory location.
This is done with the first soft knob underneath the display. -
the order of rigs is not fixed but determined by the view and order you select using the soft knobs above the display.
For a specific order add a leading number to the rig name and sort alphabetically -
Awesome Elvis beat me by a minute!
-
A,B,C and D are mono.
Trying to run a stereo effect like Space in a mono location will not produce the desired results.
Try placing Space in the X,MOD or Delay location instead.If you have the headphone space option unchecked and the SPDIF output source set to Master Stereo you should hear the Space effect when you turn it up.
From your description it sounds as if you have some problems understanding the user interface of the Profiler.
Please try to get more familiar with it by reading the reference manual and watching the turorial videos that are provided on the Kemper homepage.
This will help you to get the most out of your investment. -
I think the space is only the headphone slot via the kemper and not the interface.
space is available for any stereo output if you select the correct output source setting (Master Stereo) and deactivate the headphone space option in the output menu.
-
what is the output source setting for the spdif output in the output menu? Space only works when you have Master Stereo selected.
-
try mounting the backup in Rig Manager instead of unzipping it. I am sure all of your performances will show up in Rig Manager.
-
there is no harm in using headphones to confirm if a signal is present at a line output AFAIK.
You can adjust the level that is present at each output in the output menu of the Profiler. There is also a switch that allows you to attenuate the XLR outputs by 12 dB in case they are too hot for your interface.