the fx switches do not send any midi programchanges. Only the slot switches do.
Posts by Kemper Support #1
-
-
you need one TRS cable with a TRS plug on each end and a mono TS cable for the switch
-
the wet/dry setup is described on page 43 in the reference manual
-
I like Jimmy. He uses a wet dry rig though which is something you just can't do with a Kemper.......unless you have two of course ..actually thinking about it that wouldn't work either......not easily anyway.
M
You can run a wet/dry rig with a single Profiler. All you need are multiple speakers and the correct output source assignments in the output menu.
-
have you checked the actual output level for the direct out? Regardless of its value it will still generate sound with the 3 Git/ options but will be silent with any other output source when its turned down.
-
Yes, I can remember this awesome spatial chorus from the JC120. I have this rig but the spatial chorus is nowhere to be found. It's just a common clean rig without anything like...so disappointing. The choruses and reverbs in the Kemper don't even come close to this. So I ask myself frequently this question: What is one thinking when profiling an amp without using these kind of specific characteristics? And this happens more than once when I hear live bands using a specific guitar amp on stage, which obviously has been profiled and showed in Rig Manager but doesn't even get close in having / getting that same sound. It seems that, despite having a Kemper you still have to be a sound engineer as well..sadly enough, I'm not
effects that manipulate the time axis like delay, reverb and any type of modulation like chorus etc cannot be profiled.
-
you can use the panorama parameter in the rig menu to pan each rig to a different side of the stereo field.
-
out of the box all output volumes are linked to the master volume knob. If your speaker out does not react to the knob you must have unlinked it in the output menu. Simply activate the link again.
-
monitor cab off must be checked (activated) when you use a nonlinear guitar cab connected to the speaker output.
-
Alternativ kannst du auch einfach eine USB Tastatur an den Profiler anschließen und damit die Namen eintippen.
-
der -12dB switch senkt die Lautstärke für die XLR Ausgänge ab.
-
You need to set the interface to be the sync slave to avoid crackles when you connect the Profiler to the interface regardless if any converters from coaxial to optical are in the chain or not.
-
Der Rig Volume Regler regelt die Lautstärke des jeweiligen Rigs. Die Lautstärken der einzelnen Outputs werden im Output Menu geregelt.
Wenn man den Main Output vom Master Volume Regler trennt wird der Pegel der zum FOH geht davon nicht mehr beeinflusst. Der Rig Volume Regler beeinflusst aber weiterhin den Pegel, der an alle Ausgänge weitergeleitet wird. -
The sorting has no influence on the MIDI program change number that you have assigned to a specific rig.
-
Alphanumerical sorting is just one of several options. If you chose to sort by gain the order will be different.
The slots in perform mode have fixed assignments for program changes. -
to set the delay time in ms all you need to do is deactivate the "to tempo" option in the delay edit menu.
-
You can set the range of the pedal in the rig menu on the volume pedal settings page.
-
You can use the clean sens parameter in the input menu to control the level of the DI signal.
-
-
I've read it but can't find that update on the kemper site.
you wrote that you cannot find the 5.3.2 public beta on the Kemper website. In my reply i pointed out that you can use the latest version (5.4 PB) because it includes all fixes of previous versions.