https://www.youtube.com/watch?v=4iWgQPAuuSA&feature=youtu.be
The MIX READY METALCORE II Kemper Profile Pack features 12 mix ready studio profiles based on Iconic metal core album tones!
- A Day To Remember - As I Lay Dying - Avenged Sevenfold - Bullet For My Valentine -Children Of Bodom - Devildriver - Miss May I - Polaris - Trivium
If you are after a tone that is designed to fit into a mix these might be for you! Currently on sale at
Thanks, today I'll try it!
Awesome would love some feedback 
Let me try it again here - The link seems to be working for me though 
https://www.dropbox.com/sh/r4x…ak5x6TNU2J9bL0oxDtYa?dl=0
Hey all!
Just finished this profile pack of the Splawn Quickrod - 28 Studio profiles - 4 Direct profiles, boosted and unboosted versions with Klon and OD808 - 2 cabs - Mesa and Marshall with various speaker combinations
Only $10 at the moment as an intro offer!
Here are 4 free profiles as a tester to see if this may be something you like!
https://www.dropbox.com/home/H…%20SAMPLE%20KEMPER%20PACK
Thanks,
James
Demo -
Hey all just a question about direct amp profiles I have a countryman type 85 DI and want to add direct profiles to the upcoming Half//Sun Kemper Profiles
packs - my question is
How do I connect the DI as well as the speaker since there is no dedicated ‘speaker through option’ on the countryman - I know people have made direct profiles with the 85 in the past but I just can’t figure it out and don’t want to fry one my amps [Blocked Image: https://static.xx.fbcdn.net/images/emoji.php/v9/t8d/2/16/1f611.png] Thanks!
Gotcha, is that free update if you buy this pack or will that be an all new pack?
Will be a free update for those who have purchased
Display More
Just FYI, this thread should be moved to the Commercial Announcements subforum, as this specific forum does NOT allow profile makers to create or post responses to threads per:
"This section is for all our users to discuss commercial third party rigs. Authors of those offerings are not allowed to open threads or post into existing threads. Any other form of commercial offering, raffle etc must also not take place here. If you're an author of a commercial pack discussed in here and you feel the need to comment you need to do this via PM to the poster in question.
Note: we've changed this policy in 4/18. In order to avoid confusion authors of commercial offerings must not post here at all."
You may want to move this thread yourself (if possible), otherwise I foresee the mods doing it for you.
Ooops sorry First time with any commercial stuff so my mistake -
I know these aren't merged profiles, but have you tried them via monitor/amp output direct to a real cab?
I haven't tried these with a cab but am going to include DI profiles for the next pack released! I would imagine these would still sound great - just a bit more of a raw sound!
Hey all!
I've just launched my first Kemper profile pack - It's been years in the making and to be completely honest born out of necessity. I've bought countless Supposedly "mix ready" tones that never actually worked for me.
I've worked really hard to create 11 tones which just plain work in a modern Metal mix - The classic 5150 block letter, boosted into a marshall 1960 and Mesa Rectifier cab but with a twist!
I've re created (in painstaking detail) some of the best tones ever captured of this combo on records - Including classic tones such as: Trivium, BFMV, MIW, All That Remains to more modern stuff such as Kublai Khan and Alpha Wolf
The common thread is that these are profiled to work in a mix and deliver the tone you want from a high gain patch!
Don't just take my word - Listen for yourself!
BUY HERE - On sale at the moment for just $10
https://halfsunkemperprofiles.…/5150-mix-ready-metalcore
Thank you!
Hey all!
So i've been losing my mind trying to figure this out - Basically all I want to do is use a Pro tools EQ to notch out problem frequencies from my amp/cab (The studio EQ on the kemper Q values are too wide and arn't really what I need) From what I understand I can run the chain like this
KPA DI SEND -> AMP -> MIC -> PREAMP/Interface with preamp ->DAW-> interface out -> KPA return in
But every time I do this when I go to profile I get a warning that there is no amp connected or signal too low . . . What am I doing wrong? and also how do I actually monitor what's going on during profiling ?
Im using pro tools with a Focusrite Saffire liquid 56
Any help would be immensely appreciated!
Soo I've gone down the match EQ rabbit hole and have some really killer sounds in STL Tonality Will Putney with custom Impulses - I really love these tones and want to get them into my Kemper for live etc
I've seen that It can be done but can't figure out for the life of me how to do it! What the exact signal chain is etc
I'm running pro tools with a Focusrite Saffire 56
Any help would be awesome!
Is your Kemper connected to the computer via USB during this process? It sounds like digital noise from a non isolated power supply. I used to get a similar noise when my RJM PBC was connected to my computer editor.
It's not connected to anything via the usb at the moment! Interestingly enough if I put a noise gate on during profiling, it creates accurate profiles without the noise - It's really odd~
https://youtu.be/UMZWejCfmr4
Hey all! I just got my kemper and have been super excited to do some profiling - the problem is when I am on the profile mode the real amp/cab has this weird buzz going on - I unplugged the kemper and just tried the same chain (Minus the kemper) into the amp and it's dead silent/no buzz - As you can see in the video my noise gate in the front of the amp silences it. It is a lot quieter when I engage the ground loop button but still there - I'm not sure if maybe my Kemper is faulty? There isn't any weird noises or problems when i'm just plugged in and using the profiles normally only when on the profile mode
If someone could help me out i'd be forever grateful! Thanks!
Thanks everyone! I just found that and got it working!
Sounds killer! 
So could I use the kemper (Lasse preset) as the DI source amp? and then send the matched EQ back into the kemper?
Thanks for the info!
Damn, I could barely afford one -_- haha
Okay so, I have a tone i'm happy with, but I want to EQ match with Izotope ozone to get closer to the tone i'm looking for.
In my Daw (protools) I have a sound that i'm really happy with -> Kemper (Lasse 5150) -> Izotope Sounds great, but now I want to save the final eq sound into my kemper.
Is this possible?
I know I can mic my cab and then apply a match to send to the kemper, but the results arn't as close.
hopefully this makes sense, but any help would be awesome if there may be another way of doing this?
Alternatively, I have an ISO guitar track that I wanna match to, I saw someone saying on another forum that you can make a profile of an already recorded tone through the kemper?
Cheers!
