Whats the price point of the Kone Cab does anyone know?
$450 for the Kabinet at 24.9 pounds weight. $165 for the Kone at 8.6 pounds weight. So incrementally the cabinet weights 16.3 pounds empty for an increment price of $285. So that's the compare point for your own cabinet if you buy the Kone only.
https://www.kemper-amps.com/pr…-yInxHa-fjvEimgFBir6ZegBA
This one is close to your requirements: 1x12 Cab
I remember at one time seeing a PINE version of this (440 Live 1x12" that is) at 12 pounds. I can't seem to find it now though.
?
Sorry I forgot to put the link there. It's there now. 
This weighs 13 pounds, although I little expensive at $269. It has an open back - does the Kone sound better will a closed back enclosure?
https://www.mojotone.com/Cabin…cnmTnoyz7rSWpeEvAU5_95YnE
I found this info. Kabinet weighs 24.91 pounds and is 16. 5" H x 23.6" W x 9.1" D. Kone weighs 8.6 pounds. Kabinet without the speaker is thus around 16.3 pounds which is not terribly heavy but I was looking for something more around 12 pounds which I think I have several options. So I can get it at about 20.5 pounds with the Kone installed.
This one is close to your requirements: 1x12 Cab
A little heavy at 18 pounds, which will be about 28 with the Kemper Kone, but cheap and i like the option of closed OR open back.
I have like ZERO construction ability. I don't even own a hammer, he he.
Does anyone have any recommendations for an EXTREMELY LIGHT 1x12" empty cabinet for the Kemper Kone? By light, I'm talking under 15 pounds without the speaker (15 pounds being MAXIMUM). I don't care about durability because I don't take it on the road or anything. I have a matrix neo 1X12" which is 16 pounds WITH the Neo speaker in it (probably around 12 pounds without), but I use that as is and don't want to spend $450 for another one just to get the cabinet.
Are the dimensions and weight of the Kemper Kabinet listed anywhere? Also the weight of the Kemper Kone itself?
From the NAMM show 2020 section of this site:
"We will have a completely new designed booth and new the now shipping-ready KEMPER Kabinet™ at the booth, the replacement KEMPER Kone™ speaker which brings the KEMPER™ Speaker Imprints to your already existing guitar cabinet, and of course there will be Rig Manger™ 3, a couple of tech and fx previews and a couple of interesting guests."
I guess we will see what "shipping ready" means in terms of a real shipping date.
Any word on the release of the Kemper ? Kabinet and / or Kone? I don;t see any mention of it in any threads here for a while. At NAMM it was said that it would be released in summer 2019. I assume the Stage took hardware priority in the summer, but just curious if anyone has heard anything about the Kine / Kabinet lately?
I still waiting on the Kemper Kone / Kabinet. What ever happened to THAT?
Wow this is only 10.5 lbs? That hard to believe given that the remote by itself was about 7 pounds. So this is about the same length as the AX8 (i.e. top to bottom), about 2.5" wider (which is wider than the remote, which is a bit disappointing), but 1.5 lbs LIGHTER than the AX8. Not terrible, but I wish it was less wide.
It looks exactly the same width as the existing remote. 6 buttons. It’s obviously deeper out of necessity.
Could be. AX8 is about 16x10" and weight 12 pounds. The Profiler remote is about 16.5x7" and about 7 pounds. If they only add 3" to the length and only 5 pounds to the weight, i"m good. This seems extremely doubtful though since they are adding the full functionality of the Kemper engine and control physical panel, but we'll see.
To me, it's all about the size and weight of this. For it to be worth doing a floor unit, it's has top be no larger and heavier than the Fractal AX8. From the photos it seems it would be a bit wider than the Profiler remote and about twice and long. This would be probably 25% bigger than the AX8 and probably maybe 20 pounds if it's that big, which is WAY too heavy. I could be WAY off however. We'll see soon enough. I'll reserve judgement until then. At lease they were smart enough not to build in an expression pedal. That would have been a HUGE mistake.
My guess also is that this is less powerful in some way to justify it probably being way cheaper than the Profiler lunchbox + remote, like Fractal Audio did with the AX8 and FM3. Otherwise putting it at a price point that i below that combo makes no sense - why wouldn't everyone judt buy the floor unit?
My point is that there is nothing PREVENTING me from doing this mechanically on the web site ordering, They say they will ship worldwide and it's in stock and I put a USA address in and it accepts it without any issues. I haven't pulled the trigger yet because I don't want to do anything against Kemper policy nor am I sure that the international UK version of the Profiler Remote is exactly the same as the USA version.
The latter two things are my real questions. I am very frustrated by the lack of availability in the USA.
Tony
The Profiler Remote has been out of stock like forever in the USA. 
I'm wondering is there any reason I can't order from the INTERNATIONAL page (it says free worldwide shipping)? With this would with USA powered Kempers?
Tony
I assume then the Zoom FP02M won't work for the same reason?
I have a G3X that I use for some gigs into a clean solid state amp and it's pretty good for metal / high gain used in that manner. Cleans are terrible, but I just use the clean amp for that and bypass the G3X. To me it also sounds pretty bad direct through a PA, but I have not really used it like that live ever. Effects by themselves are awesome though - the mods / delays / distortions / octave / whammy, etc are better to my ears than the Kemper (but no comparison for amps - Kemper wins hands down)
