Posts by spk77

I really like the rhythm guitar sound in this clip (especially the palm muted parts at the start and @1:36).

Any ideas how to get that sound? (I wish I could hear the isolated guitars only )

Quote from Monkey_Man

Battle Beast rocks, man!

Kemper spotted @ 1:56
(BATTLE BEAST Tour 2017 @ PARIS - Le Petit Bain - 25/03/2017)

Here's a profile: Battle Beast test.zip

(Lately, I've been listening to Battle Beast - I like that 80s feel with a modern sound):

Comparing sysex dumps (Using init message F0 00 20 33 02 7F 7E 00 40 02 3B 05 F7)

Here you can see the differences:
Left: delay slot "on"
Right: delay slot "off"

Quote from RobertKrejci

Thank you very much for your reply. But it doesn't work to me. I send init message:
F0 00 20 33 02 7F 7E 00 40 02 3B 05 F7
KPA responds with a full "02" set of parameters.
I repeat it every 3 seconds.
The Delay slot is in most cases returned as "0" although it is on.

My KPA doesn't respond to this your Request Single Parameter ("0x41") message at all - when communication is active nor without init.

Do you use any initialization sequence? Or do you send it immediately without init? Which software do you use for sending the messages to KPA?
Thanks.

Display More

I'm using Ctrlr (http://ctrlr.org/).

I just send single parameter requests to update the modulators - I'm not using any initialization sequence (there's no active communication happening at all.)

Hello.

It seems to be working here.
If I send...
F0 00 20 33 02 7f 41 00 3c 03 F7 ( 3c = address page for delay slot)

KPA returns...

f0 00 20 33 00 00 01 00 3c 03 00 01 f7 (...if stomp/fx in the delay slot is "on")
or
f0 00 20 33 00 00 01 00 3c 03 00 00 f7 (...if stomp/fx in the delay slot is "off")

How do we add a download counter for attachment files?

I mean this:

This is what happens when I try to change the color, font size etc. in WYSIWYG -mode:

(The selection seems to be somehow ignored)
I'm using SRWare Iron. It's a Chromium based browser.

This is interesting...
"Get and save" -button sends three sysex messages to Kemper, here's the first one:
f0 00 20 33 02 7f 47 00 00 00 06 0d 20 f7 (this seems to be "request filename for current rig")

This is what Kemper sent back when I tested it:
f0 00 20 33 00 00 07 00 00 00 06 0d 20 7b 44 4f 43 55 4d 45 4e 54 53 7d 2f 4b 65 6d 70 65 72 41 6d 70 2f 52 69 67 73 2f 53 50 4b 37 37 20 45 35 33 30 20 31 32 30 35 31 37 5f 34 20 55 20 2d 20 32 30 31 37 2d 30 35 2d 31 33 20 31 32 2d 32 36 2d 30 31 2e 6b 69 70 72 00 f7

Now bolded part to ascii -> {DOCUMENTS}/KemperAmp/Rigs/SPK77 E530 120517_4 U - 2017-05-13 12-26-01.kipr

Too much msb/lsb value mapping difficulties with "combobox" component...maybe a popup menu would be better for selecting FXs:

Current Stomp types

(I browsed through all stomps and sent F0 00 20 33 02 7f 41 00 32 00 00 00 F7 to request the current stomp type in Stomp slot A)

Single parameter request (Stomp A type)
F0 00 20 33 02 7f 41 00 32 00 00 00 F7


Response
f0 00 20 33 00 00 01 00 32 00 00 00 f7	- empty -
f0 00 20 33 00 00 01 00 32 00 01 12 f7	Single Delay
f0 00 20 33 00 00 01 00 32 00 01 13 f7	Dual Delay
f0 00 20 33 00 00 01 00 32 00 01 14 f7	TwoTap Delay
f0 00 20 33 00 00 01 00 32 00 01 15 f7	Serial TwoTap Delay
f0 00 20 33 00 00 01 00 32 00 01 21 f7	Rhythm Delay
f0 00 20 33 00 00 01 00 32 00 01 24 f7	Quad Delay
f0 00 20 33 00 00 01 00 32 00 01 11 f7	Legacy Delay
f0 00 20 33 00 00 01 00 32 00 01 16 f7	Crystal Delay
f0 00 20 33 00 00 01 00 32 00 01 17 f7	Loop Pitch Delay
f0 00 20 33 00 00 01 00 32 00 01 18 f7	Freq Shifter Delay
f0 00 20 33 00 00 01 00 32 00 01 09 f7	Dual Chromatic
f0 00 20 33 00 00 01 00 32 00 01 0a f7	Dual Harmonic
f0 00 20 33 00 00 01 00 32 00 01 0b f7	Dual Crystal
f0 00 20 33 00 00 01 00 32 00 01 0c f7	Dual Loop Pitch
f0 00 20 33 00 00 01 00 32 00 01 22 f7	Melody Chromatic
f0 00 20 33 00 00 01 00 32 00 01 23 f7	Melody Harmonic
f0 00 20 33 00 00 01 00 32 00 01 25 f7	Quad Chromatic
f0 00 20 33 00 00 01 00 32 00 01 26 f7	Quad Harmonic
f0 00 20 33 00 00 01 00 32 00 00 01 f7	Wah Wah
f0 00 20 33 00 00 01 00 32 00 00 02 f7	Wah Low Pass
f0 00 20 33 00 00 01 00 32 00 00 03 f7	Wah High Pass
f0 00 20 33 00 00 01 00 32 00 00 04 f7	Wah Vowel Filter
f0 00 20 33 00 00 01 00 32 00 00 06 f7	Wah Phaser
f0 00 20 33 00 00 01 00 32 00 00 07 f7	Wah Flanger
f0 00 20 33 00 00 01 00 32 00 00 08 f7	Wah Rate Reducer
f0 00 20 33 00 00 01 00 32 00 00 09 f7	Wah Ring Modulator
f0 00 20 33 00 00 01 00 32 00 00 0a f7	Wah Freq Shifter
f0 00 20 33 00 00 01 00 32 00 00 0c f7	Wah Formant Shifter
f0 00 20 33 00 00 01 00 32 00 00 11 f7	Bit Shaper
f0 00 20 33 00 00 01 00 32 00 00 12 f7	Recti Shaper
f0 00 20 33 00 00 01 00 32 00 00 13 f7	Soft Shaper
f0 00 20 33 00 00 01 00 32 00 00 14 f7	Hard Shaper
f0 00 20 33 00 00 01 00 32 00 00 15 f7	Wave Shaper
f0 00 20 33 00 00 01 00 32 00 00 21 f7	Green Scream
f0 00 20 33 00 00 01 00 32 00 00 22 f7	Plus DS
f0 00 20 33 00 00 01 00 32 00 00 23 f7	One DS
f0 00 20 33 00 00 01 00 32 00 00 24 f7	Muffin
f0 00 20 33 00 00 01 00 32 00 00 25 f7	Mouse
f0 00 20 33 00 00 01 00 32 00 00 26 f7	Fuzz DS
f0 00 20 33 00 00 01 00 32 00 00 27 f7	Metal DS
f0 00 20 33 00 00 01 00 32 00 00 71 f7	Treble Booster
f0 00 20 33 00 00 01 00 32 00 00 72 f7	Lead Booster
f0 00 20 33 00 00 01 00 32 00 00 73 f7	Pure Booster
f0 00 20 33 00 00 01 00 32 00 00 74 f7	Wah Pedal Booster
f0 00 20 33 00 00 01 00 32 00 00 61 f7	Graphic Equalizer
f0 00 20 33 00 00 01 00 32 00 00 62 f7	Studio Equalizer
f0 00 20 33 00 00 01 00 32 00 00 63 f7	Metal Equalizer
f0 00 20 33 00 00 01 00 32 00 00 65 f7	Stereo Widener
f0 00 20 33 00 00 01 00 32 00 00 31 f7	Compressor
f0 00 20 33 00 00 01 00 32 00 00 39 f7	Noise Gate 2:1
f0 00 20 33 00 00 01 00 32 00 00 3a f7	Noise Gate 4:1
f0 00 20 33 00 00 01 00 32 00 00 41 f7	Vintage Chorus
f0 00 20 33 00 00 01 00 32 00 00 42 f7	Hyper Chorus
f0 00 20 33 00 00 01 00 32 00 00 43 f7	Air Chorus
f0 00 20 33 00 00 01 00 32 00 00 47 f7	Micro Pitch
f0 00 20 33 00 00 01 00 32 00 00 44 f7	Vibrato
f0 00 20 33 00 00 01 00 32 00 00 45 f7	Rotary Speaker
f0 00 20 33 00 00 01 00 32 00 00 46 f7	Tremolo
f0 00 20 33 00 00 01 00 32 00 00 51 f7	Phaser
f0 00 20 33 00 00 01 00 32 00 00 52 f7	Phaser Vibe
f0 00 20 33 00 00 01 00 32 00 00 53 f7	Phaser Oneway
f0 00 20 33 00 00 01 00 32 00 00 59 f7	Flanger
f0 00 20 33 00 00 01 00 32 00 00 5b f7	Flanger Oneway
f0 00 20 33 00 00 01 00 32 00 00 40 f7	Space
f0 00 20 33 00 00 01 00 32 00 01 01 f7	Transpose
f0 00 20 33 00 00 01 00 32 00 00 0b f7	Pedal Pitch
f0 00 20 33 00 00 01 00 32 00 00 0d f7	Pedal Vinyl Stop
f0 00 20 33 00 00 01 00 32 00 01 02 f7	Chromatic Pitch
f0 00 20 33 00 00 01 00 32 00 01 03 f7	Harmonic Pitch
f0 00 20 33 00 00 01 00 32 00 01 04 f7	Analog Octaver
f0 00 20 33 00 00 01 00 32 00 00 79 f7	Loop Mono
f0 00 20 33 00 00 01 00 32 00 00 7a f7	Loop Stereo
f0 00 20 33 00 00 01 00 32 00 00 7b f7	Loop Distortion

Example: send F0 00 20 33 02 7f 01 00 32 00 01 12 F7 to set "Single Delay" to Stomp A slot

• $F0: SYX
• $00 $20 $33: Access/Kemper Manufacturer ID
• $02: Product Type $02 = Kemper Profiler
• $7f: Device ID $7f = OMNI
• $01: The function code for a single parameter change is $01
• $00: Addresses the instance of the parameter (always 0)
• $32: Controller MSB (MSB of Stomp A address page in this example)
• $00: Controller LSB (LSB of Stomp A address page in this example)
• $01: Value MSB (Single Delay in this example)
• $12: Value LSB (Single Delay in this example)
• $F7: End of Sysex

Quote from Forfeit_Productions

Very cool! Is there a way to control the parameters of the stomp modules?

I haven't tested it yet, but it should be possible -> there's a Ctrlr panel (KPA Stomps panel) in post #1, but I cannot find a working download link.

Thanks DamianGreda (and all the others) for the hard work!

I finally tested how the two-way MIDI communication work if there are more parameters (and more parameter requests):

(It is a little laggy when I set the "parameter request interval" to 50 ms and turn the knobs on Kemper)

Quote from azertyvince

IMHO, a VST plug-in to recall the rigs on a track of your sequencer (through RM for exemple) would be better than an editor.

An editor that could work as a stand-alone program or as a VST(i) would be perfect.

Is it possible to get current rig data via MIDI? If it is possible then storing/recalling track specific rigs (or even take specific rigs) would be possible in REAPER by using ReaScript Lua.

We can use Ctrlr as a lite version of an editor. Here's a MIDI communication test:

"MIDI data flow":

RM -> Kemper -> Ctrlr panel
or
Ctrlr panel -> Kemper
or
Kemper -> Ctrlr panel

Here's a soundclip:

(these profiles are from post #52)

3 new profiles: SPK77 E530 GM36 190517.zip
This time the high mids are boosted a little bit.

2.0.19 installed -> no more crashing, thanks!

Ok, I got Rig_Manager_2_0_19.msi (installer file) via RM update mechanism (I have RM on my home computer).
Now I just copy paste the file to a USB stick and install it from there.

Quote from Nightwish2

You don't need the Kemper to update rig manager on the computer but only the computer. So connect it to the internet and update to the latest Version.

Yes, of course (don't know what I was thinking ).
But I still would have to bring the computer (it's a desktop computer) home from our rehearsal place -> update Rig Manager via internet -> take the computer back.

Quote from G String

2.0.19 is available through Rig Managers update mechanism.

Thanks, but there's no internet connection in our rehearsal place (my Kemper is there).