I do hear it now in my DAW now. I must have set it up wrong. But there is no stereo parameter either indicating its there like say tremolo or delay. Thanks.
Posts by lionelframpton
-
-
I'll try it again maybe I did something wrong.
-
It is stereo, just move it from D to Mod and you'll hear the difference
I stated that at the beginning of this thread that I already did that.
-
Titles get your attention bro. I read that description on page 224 bro and I understand it. I put a stereo track in my DAW and there is no stereo imaging going on and it doesn't sound stereo to me. That's all bro.
-
I posted about the chorus effect not being in stereo and a couple people responded put it in the stereo effects slots x and mod but I already did that before I posted the comment. There is no stereo control parameter and it doesn't sound stereo to me. My thread was closed for some reason, so I'm re-posting it to get to the bottom of this. Is chorus effect available in stereo or not? Thanks.
-
and its not here, hand smacking face!
-
I think Ted Nugent only used 120 watts on his Peavey. He used to use the Fender Twins at 85 watts. 200 watts ain't loud enough?
Well Ted Nugent sucks so there's that
-
Get a second one
Haha
-
I've tested it and concluded its definitely the algorithm turning the monitor output down because I'm going over the 200 db. The powered kemper cab just isn't loud enough for my needs when playing with a band without the help of a pa system. Sucks but them's the facts.
-
Yes I have the monitor volume unlinked from the main output
Actually I haven't. I have main out unchecked but not monitor out. Why would that reset my monitor volume though? Also I can't adjust it on the fly without going into the output menu.
-
Have you tried unlinking the monitor volume? Power Amp boost adds 6dB (and no, it wont be killed by the safety circuit?
Yes I have the monitor volume unlinked from the main output
-
I guess I just want to know if this is normal? Is it the algorithm turning my profiler monitor output down? I see the db and its not even close to hitting 200 db Why won't it stay where I set it?
-
Had one and it was walls-shattering loud. Where do you have your monitor volume?
Yeah mine sounds loud too then it turns down. Which is the issue.
-
That is not possible. Monitor volume is global. How do you balance the volume of the different rigs?
I said I believe it but I may be wrong. For instance I'll have my monitor volume sounding fine at say -3db and then a few mins later I can't hear myself and I look and it now says -5.7 db and now that's as loud as it will go when I turn the master volume up. I have to go into output settings and turn the monitor volume back up and then we start the process all over again. This isn't as noticeable when I have the profiler connected to both the cab and a pa system because I have a pa monitor also but when I play without a pa with the band it doesn't cut it. And yes we play loud.
-
"If you need to get even louder, you can still increase Power Amp Boost."
So if I need more volume I can turn on the 6db power amp boost but my amp algorithm is going to turn it back down? That's a great feature! In my opinion this powered Kemper cab should be much louder for the price. This thing is not cheap. It's extremely frustrating. Yeah it sounds fine in your room then you get to the gig and can't hear the cab.
-
I have the volume all the way up up on the cab. I can see the db meter and its not going over the 200 db at all. I believe the monitor volume is changing when I change presets.
-
I bought a Kemper stage and a powered Kemper cabinet. I have the monitor output unlinked from the main output. When I set the monitor output to zero dB, which is its highest output, and add 6DB to the output, it keeps changing back to a different lower volume on its own. It keeps changing to a lesser volume setting than I set it at and then it won’t go to 0 db unless I go into output menu and turn the monitor knob up. It’s driving me nuts there’s not enough stage volume.!!! Why is it changing? My powered Kemper toaster does not have this issue. Why won’t it stay at the volume I set it at???
-
You used to come here, ask questions, provide reasonable opinions and basically behave like a normal person.
Now? It’s nothing but criticism, demands and an “I’m right…you’re wrong.” mentality.
You're not asking for advice and you’re not offering advice. You’re telling everyone why you think the KPA sucks and then watching what happens.
On the Kemper-sponsored forum. The one place guaranteed to not react well to it.
So, yeah…..exactly like a Troll.I like to mix it up on here. I love Kemper. I bought 2. Hard to read my tone sometimes. Guess you could misread it as trolling. I tend to point out all the negative stuff because it’s the things I’d like fixed that are bugging me personally. Kemper is great with all the frequent updates. Always room for improvement. You could just ignore it. Are you’re trying to get to that next level. What’s after master? You won. You know it all.
-
Masters hate me and I love it. I bring up everyday user problems we are having and they just want to dismiss it. But just know I’ll be here to point it out till they kick me off.
-
Don’t feed the Troll.
yeah I’m trolling because I’m pointing out the obvious. Truth hurts I guess.
