Check the output setting for Pwr Amp Boost.
Posts by dmatthews
-
-
thanks i will usde tghe link you sent me . and yes, the Kemper is connected through USB to my Mac and has the latest updates installed ( im prety sure. IM bad ewith computers and have been a Marshall user over 40 years. Im new to technology but when i hooked uo the USB, the Kemper seems to have updated itself which took quite a few minutes. Then the remote was intemittent. I weas told to buy a new cable and it was left up to me to determine if its the cable or the Remote itself . SO i spent. $50 which i lose, and this is to test to see if its the problem.. . Sometimes when i morph w the pedal (learned on video how to program) it is morphing but the display in ther rig manager doesnt go from red to blue, however the morph feature will still work . So i reboot , which takes like a minute, and then it usually brings the display back in coordination with the pedal. And the whole time the Rig Manager may lock up randomly, or loses my Kemper even though im on my 3rd usb connector and it works wit😳h every other device in my studio. So bottom line im wasting hours troubklew shooting instead of practicing for gigs and im getting frustrated and i just dont know what to do. Then i come here for solutions and get told i need to read manuals when the things that are happening are abnormals... So i, try t😳he lini and thanks. I really love the machine just wish i knew wha was wrong..
Understood mate. I'm sure support will assist in sorting out the issue!
-
Like the title says, Ive owned a kemper since before the remote. Great piece of gear. Only complaint is not having the simplicity of the all in one unit like the stage so I finally got one. What are some best practices for owning two kempers ? How does one sync both units in terms of Performances and rigs ? Can the units be synced and have other differences like the reassignment of looper switch and output settings etc ? Any other useful tips ?
I ended up getting a second unpowered head unit.
The one I keep at home is the test/play unit, and the one at the practice studio is the production/gig unit.
When I am happy with the changes I make on the home unit I back it up and take the USB stick to practice and update.
Works a treat, and some pros travel with a USB stick and just ask for a Kemper at the gig.
-
OK, that's the Rig Manager version, as opposed to the firmware level on the Kemper. In any case it's the same RM version as mine so I suspect you are on a pretty recent Kemper OS version as well.
If I were you I'd open a ticket with Kemper support so they can help you out. RM should not randomly quit.
-
brand new Mac. well 1 year or so old so whatever is in it . The rig manager quits working after a few minutes if not used . Then i have to close it and reopen it and it works again...
Sorry, I meant on the Kemper itself. What version is the Kemper on?
-
-
So far I am a fanboy with the Kabinet.
Powered by SD 700, or Camplifier.
-
Sounnds the same, no?
The imprints may sound okay with that cab but I don't beleive they are accurate to the Kone?
No idea... Looked it up and the speaker is
Aktiv, 2-Wege
- Total Impedance N/A - Active Speaker
- Frequency Response 70Hz – 20kHz (-3dB)
- HF Transducers 1” Compression
- LF Transducers 12" Special Design
Never heard of it, but so what. Super happy with my Kabinets, but it would be interesting to A/B these...
-
No it does not. Just tried that.
It does for me. Perhaps because I'm in Performance mode, and maybe because you're in Browser mode.
-
That jumps to "My Profiler".
-
Brilliant. I need some narrowfield pups in my life...
-
Should be here in the next day or two. Bought one that was Faded Blue in September but wasn't able to play it for a few weeks because of a self inflicted palm injury.
Once I had the opportunity to play it, I liked it enough that I decided to sell the three electric guitars I had and get another 24-08. I liked the others, especially the EBMM Cutlass, but I don't do well switching from one neck profile to another, shouldn't be an issue now.
I hear good things about this model. Very versatile...
-
I'll never understand the gig bag thing. I wouldn't carry a guitar worth over $50.00 in one. They take up the same space as a case (It still has to fit a guitar in) Guitars get a little scratch protection but none from any pressure. A bump against a doorway can still bust a pot or tuner and damage wood. It's just not worth the gamble, I'll just carry the guitar in two pillowcases for the same protection and then it won't look like it can take more than it can.
I get it, and make no mistake, some of my axes are NOT cheap. That said, I've transported my best and least in the RBX and have never experienced a negative.
Only home to car to gig/practice and back though...
-
If using Rig Manager, click on Output (far right) and look for Monitor, and Output Linked" button.
If using the Kemper interface on the unit, press the Output button and go to page 2
-
Is the monitor out volume tied to the master?
-
Hm two guitar gig bag. Sounds practical. Any recommendation?
The one I chose is a Reunion Blues RBX. Has been stellar for years...
-
Display More
What I can do with my "old" Kemper is:
1) Carry my entire guitar rig in one trip from the car (and fit it in a car)
2) Plug-in and setup in 5 minutes
3) Sound great with a level of consistency I was never able to achieve with boutique tube amps and pedal boards
That is where I live when it comes to what I need for a gig-rig
Yup... Last gig I sauntered in, plopped down the Head on top of the Kabinet, plugged a XLR into the Main out to the PA, and done.
Sound guy was completely happy and away we go.
Love it!
-
Doesn't work for me (Pixel 7 Pro, Android 14). The app can't find my profiler in Home-Network mode and when I change to Access-Point mode then it can't connect either because there's a popup saying "Rig Manager needs access to devices".
I get this too. Pixel 7 here also.
I wonder if Pixel 7 has some firewall settings we don't usually expect?
-
I tried all the CAT5 and CAT6 cables, and when they were linked, the Remote screen flashed and went out.
Can you try your remote with a different Kemper?
How long are the cables you tried?
-
I bought this and it works a treat!
I would not recommend going for a longer cable than 20 - 25'
