Hi, Burkhard could you consider uploading to the Factory Rig Packs all the Rigs and Performances used in Kemper's Video Tutorials ? Tx.
Posts by Syntek
-
-
-
So you are saying these profiles dont matter? No need to use them? If you are bad, these profiles will not help you? You should just sell your Kemper and move on?
Not sure what you are trying to say, but I think it is pro Kemper?
Most of the Factory content is based in samples of pro level commercial profilers. Regardless of free or paid stuff, each profiler has his own profiling style and signature sound, that you may or may not like.In my case some profiles that Thomas used, didn’t get a WOW effect from me in the past, to my personal taste, but after checking what he did with them in the Tribute packs I smiled an immediately WOW,
-
I’ve tried some of the rigs. Super Cool!!
Most of our Requests have been included in this pack and more. Thank you Thomas and Kemper team!!
These rigs use free factory profiles. This is a proof that it is the archer not the arrow. It is the player not the profile. -
The video...
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
Has anyone successfully used a USB Server (USB-Ethernet ports) to connect Rig Manager (MacOS) over Wifi?
Please share what products are you using.
-
What's your take on the quality of Kemper Drive compared to the OD pedals they are modeled after? I'm going to play with the Kemper Drive vs. my Tubescreamer and Wampler Tumnus but interested to see if I hear a big difference. Interested in other people's takes though if they've already been down that road. Much thanks!
You can read many comments about Kemper Drive in this thread:
-
Get comfortable with some of the free stuff first before committing to paid plugins unless you have to have it.
Thanks. Have you found a free alternative to RapidComposer or similar than can auto-harmonize melodies, chord suggestions, chord detection and provide some help for song writing?
-
I am setting up my home recording DAW (Studio One). I am looking for plugins that make much easier composing and arranging songs.
What plugins VST would you recommend, either paid or free?
Looking for a virtual bass player and drummer, composer and chords tools, etc.
Some plugins that called my attention: EZDrummer, EzBass, Rapid Composer, Riffer, Scaler, Melody Sauce, Captain Chords.
Any advice is welcome
-
-
Hi, I would like to buy Studio One DAW for guitar home recording. Please help me choose the right version.
I don’t have music theory background, so, I am looking for a tool that makes creating music much easier: composing, arranging, producing, and recording.
I’ve checked that StudioOne Professional or Sphere have way more stuff than I need, but it has some interesting features like Chord tracker, Score editor, melodyne, lyrics support and guitar tablature , not available in Artist version. However, honestly, does those features worth the extra money? Would Artist version and some third party plugins, would be enough for what I need? -
The Remote requires power, which can only be supplied via cable.
The Remote can still be connected and powered through the Toaster. The dongle would be a good option to get wireless access to the Kemper Head. However I guess the USB port purpose is solely for update/backup functions and does not support this type of wifi dongles nor USB audio.
-
So basically I still need a hard wire to the Router. i.e. cable to PoE, then cables from PoE to the Profiler and the Remote?
Yes, the Router will provide the WiFi connectivity to your phone/iPad.
A WiFi dongle would be a great solution, for sure.
-
You will need to use the Remote cable and any other Cat5E Ethernet cable to connect the Remote and KP head to a PoeEswitch like this:
TP-Link TL-SG1005P V2 or later | 5 Port Gigabit PoE Switch | 4 PoE+ Ports @65W https://a.co/d/cgA6w1J
The PoE switch needs to be connected (wired) to your local wifi router.
-
-
If you have enough channels available, the most convenient option is connecting the 2 XLR Kemper main outputs to 2 XLR MG16XU input channels. Don’t use mixer compression, preamp, HPF, internal FX, mic settings, just LINE. Otherwise, you will have to use mixer’s unbalanced 1/4” L/R inputs (9/10 or 11/12)
-
A Kemper 2 killer feature would be that all the features mentioned above would be so efficient, that could be just updated into the Kemper 1.
-
Schmidtarray has some models that fit remote or KP stage with room for expression pedals.
-
@steveboss007 are you getting the “artificial” tone when you play through headphones (cab sim on), too? If BM profiles sound good for recording, and your headphones deliver the tone you want, I don’t see why they would not sound good for live with some live tweaks? It sounds that the artifacts you are hearing are coming from somewhere else in your signal chain. Where are you hearing the artificial tone, FOH, or your power cab on stage.?
You could try changing cabs/ir in your kemper rig, or your power cab /frfr type of sound is not what you are expecting at louder volumes live and better you go for a regular guitar cab in that case.
Yes, I have that pack. It is good but sounds too thin. Everything from BM sound good to me for recording, but for live, too thin.
-
It would be great if Rig Manager could allow to configure signal chains with more than 4 effects pre and post stack, while giving the option to set just 4 pre and 4 post stack effects into the physical stomp buttons and assign 4 remote buttons as usual.
We do have a lot of tools to shape the sound pre or post stack, like double tracker, widener, EQs, loop, transpose, etc., a lot of interesting stuff that coupled with other effects, it is very hard to be constrained to 4 stomp slots. For instance, some of those sound shaping stuff in a signal chain may be used always-on in a Rig and they do not really need an on/off switch through the stomp buttons or remote switches. Those could be easily configured just from the RM.
