I believe if you place the mod in A, B, C, D or X it will be mono.
Actually, all the slots in the Effects section are stereo, Stomps would be the correct section for a mono outcome.
Delays have the Stereo parameter that can be set for a mono behaviour, but not choruses 
Thanks for coming up with that - that is an inventive idea! I don't think it would work for me though as I would be using other Performances and Rigs.
I believe it should work with a performance made of 2 rigs only as well
Delay and reverb have dedicated physical knobs on the device for Time and Mix (the two most likely things you would want to change quickly).
To be precise, those encoders will work on whatever effect is in the Delay And Reverb slots of the Effects section; and their behaviour will depend on the effect itself.
IOW, the encoders are "hardwired" to those two slots and won't "follow" delays and reverbs should they be placed elsewhere.
Thought it might be useful to know for beginners
I've experienced the same behaviour, where I could not paste a rig in a performance's slot (I was in Performance mode, the slot was activated etc). The workaround that worked for me was to close RM and restart it.
I am pretty sure it's a glitch/bug in the app, but couldn't fin a way to consistently reproduce the issue till now.
Lunchbox, last Release and RM version, W10.
You are in touch with Support, so definitely follow their advice(s).
It sounds like an artefact to me. If support were not investigating the issue, I'd try a System reset and then (if that did not help) a Rig reset to ensure that no rig is damaged.
In terms of testing, I'd exclude all the sections of the rig and activate them one by one, in order to isolate the perspective source of the issue.
HTH
I owned one several years ago. Played with many profiles, but never edited any of them. Just got a new one and was prepared to dig in. But the manual’s aren’t very clear on what to press/turn to do things. And what had to be done on the profiler versus in Rig Mgr? I need a Kemper for Dummies manual/book. I didn’t see a single book on Amazon.
Just to clarify, are you referring to the Main manual (that only exists in .pdf format on Kemper's site) or the printed Basic manual that comes with the unit?
For some reason, many users don't seem aware that Basic... basically shows the UI and I/O only, while the KAOS' functions are described in the Main.
Also, note that when you install RM, a copy of the specific manual is loaded onto one folder of your computer (on W10 it would be c:\Users\[Username]\Documents\Kemper Amps\Documentation\Rig Manager).
HTH
It sounds like, all of a sudden the rig decided to use Performance tempo, which was by chance set to a different (double?) value.
Would this make (clean) sense? LOL
Yep, this has been requested many times to no avail. It seems CK found no interest in it.
I don't think that your issues are related to this Rig Manager release. If the installer (which is an MS product) cannot install the required files, Rig Manager cannot work as expected. Also, an icon doesn't just vanish (especially when the app is not even launched). You might want to look into your Windows installation.
I agree that was a sort of incident, I fixed it Windows-side with a trick or two.
I continue to not be able to see the arrow and buttons (within RM) I mentioned in my original comment tho.
This is what I see (1920x1080) on my screen. Video Card is a simple
AMD Radeon HD 5450 I've been using since years.
I changed nothing in my setup, video settings, resolution and the like: just installed 3.3.40 R (and later on .43 R) like I've always done.
Any help (or the installer for a previous R version of RM) would be appreciated.
Thanks!
Try to launch Rig Manager while holding the SHIFT key. Then agree to restore defaults. Does that help?
Hey G String, thanks for getting back at me.
To complete my report about 3.3.40 R, here follows what happened... it's somehow interesting.
As soon as installed the new version, I had kept RM open for a number of days, sometimes with the KPA on, sometimes not.
When I finished with my project I closed the app. When returning to my PC some time later, I realised that the RM icon on the toolbar had turned into a white rectangle. After rebooting the computer the icon was totally gone.
I had to search RM from the Start menu, launched it and as soon as 3.3.40 started I was prompted to install 3.3.43.
This happened before I tried the [Shift] start.
Then I tried it. The KPA was connected and running.
The issue I originally reported and to which you responded was not solved with V .43.
OTOH, the sign "Looking for Profilers" appeared... and RM could not see/find the Profiler.
While I was filling in my personal data again, RM shut. I tried and relaunch it from the toolbar, but the icon had become irresponsive and W10 asked me to delete it. I confirmed the deletion, and searched the Start menu again for re-launching RM. W10 started to install it again instead (can't say which version).
In a few second a warning message appeared: «The installer has insufficient privileges to access this directory: C:\Program Files\Kemper Amps. [...] Log on as administrator or contact [...]
Please note I am the Administrator.
When I abort the installation, the progress bar reverts to 0 and the installation aborts.
Now I am going to restart w10 and see what changes
--------------------------------
W10. Always and only installed Release versions.
Both working here on Windows 10 with 3.3.40. Display is at 1920 x 1080.
(Replying to pippopluto)
Thanks mate, unfortunately this doesn't help me. I don't even know where to start searching for a possible solution 
I hope what I've been experiencing with 3.3.40 is user mistake:
1. I can't find the Arrow that closes the Editor section (with the Editor open, what remains on the screen is really too little in order to work comfortably)
2. Where have the red buttons for saving the new work on the computer/Profiler gone?
This is what I have experienced in the first 5' of use, hope there are no further hidden tricks!
Keep in mind that if/when the Input is not locked each rig carries its own settings, which include the (Input) NG.
Also, Browser and Performance mode are independent 
in the meantime you can get accurate control of fine tuning by holding SHIFT while using the mouse.
It's not accurate enough for me as well. There should at least be a parameter to set how much resolution Shift adds
I see this thread is old, but I believe it deserves some momentum. The voting system needs IMO a way to be more focused and, finally, useful. Otherwise it remains a nice proof of concept.
p. Read the 4th post on page one of the thread. If vol pedal 2 was implemented, you’d have a free slot, never have to save levels one rig at a time while on a gig.
Oh, I do it by default, not at gigs. It takes 10", and no extra slot?
My setting are such that once the overall output level has been set at a venue, usually every rig works (volume-wise) as is. If it doesn't, I engage the boost.
Hope this makes sense
Still wont do what i would like it to do. Because i want to be able to change the level of SOME but NOT all rigs with one operation
You lost me here... I do that on a per-rig basis. when I am on a rig, pressing the same switch engages Morphing for that rig only.
Am I missing something about your scenario?
I'd like the morph function to turn on/off effects. I realize I can assign effects to that patch, and just adjust the mix for the morph function, but I'd like to be able to have them turn on when I hit morph.
Hey Bushwack, what would the limitation be in just engaging the effect in itself?
My workaround ATM has been to assign each rig switch of the Remote a morphed (higher) level. It literally takes 1/10" to press the switch in case it turns out I need it.
