Did you contact support as is clearly stated in first sentence of the error message?
Posts by vjelen
-
-
In the past I had problem with both carpal tunnel & trigger fingers 🙁 and I am afraid that only real solution in both cases is surgery!
-
re 1.: see Addendum 8.7, chapter "What is new in version 8.6"
re 2.: yes, you can! See Main Manual 8.5, page 148, "Morphing"
re 3.: there are some threads in this forum about this. If you are looking for pure DI, I would start with profile with empty amp block
-
Did you try to update via usb? If yes, how it was going?
-
-
I would create separate rig(s) for guitar with low output pickups and increase accordingly rig volume (or alternatively amp volume). If this is not enough than my 2nd choice would be definition. Good luck!
-
I got answers from support mostly same day I asked!
-
I wonder, why don't you ask support directly?
-
This was the answer I was looking for. I don't want (or at least prefer not to need) a separate app. I wanna to this in RM.
Yes the profiles will the same, since essentially to me, profile = song, so I'm essentially reordering songs, and add/delete them. And I have set up a folder (one for now) under the "Performances" menu, and called it "RaleighBrewing." But how do I "load" the "RaleighBrewing" folder onto my Kemper. Or is it already there, correct? If so how can I "recall" the "RaleighBrewing" folder on the Kemper? I do not bring a laptop to the gigs.
TIA
I am afraid that Wheresthedug proposed something different than you think:
1. You can create in RM (not Profiler) separate folders according to your needs and you copy content of particular folder to Profiler when needed.
OR
2. You have everything in your Profiler and using drag & drop method just reorder everything according to your needs.
Hope this explanation makes sense and helps you.
-
I am afraid this is technically impossible!
-
All I can say is I own competitors products , and their firmware builds are way more stable ( without bugs).
So why don't you use these competitors products with the "great bugfree firmware", sell Kemper and be happy?!
-
I think best would be to close this thread!
-
Maybe the thread title needs an upgrade.
Or new thread with correct subject!
-
From the forum discussions I understand that the current version of RM (public, NOT beta) is 3.2.70.
But in the download area I can see only previous version, i.e. 3.2.65
So where can I download 3.2.70??
-
What manual says is correct and also working WITHOUT need of additional audio interface. Just plug your mp3 device to the Kemper Return1/2 (you have to use Y-cable), set the volume for example to the Monitor Output and that is. If this is not working for you there must be some other problem and probably you need to contact support directly.
-
Short Answer: Yes, they are. But more or less accurate.
Long Answer: RTFM – read the … manual … there are three types of profiles.
Studio Profiles: complete signal chain in one profile. You can deactivate the cab, but it is not very accurate.
DI-Profiles: Only Amp Section, no cab is profiled
Merged Profiles: Combination of studio and di. You can deactivate the cab and it’s accurate.
Agree with your your comment re "reading manual". I strongly recommend to read Main Manual 8.5, you will find answers there for sure.
Disagree with your comment re "studio profiles". If you deactivate the the cabinet it is not 100% acurate but almost 100% and when use it you probably don't recognise the difference. That's the reason why many profile producers are selling mainly studio profiles.
-
I always use 5 instead of 17, 10 instead of 22 and I come from Europe.
It's easier to pronounce (I never in my life said: "let's meet at quarter to seventeen ") and easier to operate.
On a clock I have 5 not 17, 10 not 22.
Yes, this is true for "analog" representation of time. But what about the "digital" version? Would you really prefer "5 pm" to "17"? To be fair, all this discussion seems to me a bit ridicoulus. I can live with both versions, but to implement it as an option is for me priority no. 9999999....
-
vjelen Windows 10. And whichever update to Rig Manager the most recent was (edit - 3.2.70).
Maybe my issue is with my Kemper and not the RM update.
Any previously known issues that would give me great tone for a few seconds - then go to a drastically reduced bypass-like signal?
I would reinstall RM and if it won't help - open support ticket.
-
laco65 and DrProgNerd could you be more specific? What OS and RM versions are you using?
-
Did you try this?
In the Output Section, the Auxiliary Input function is equipped with three mix controls: one to feed the aux signal to the MAIN OUTPUT as well as S/PDIF OUTPUT, and two others to feed it to the MONITOR OUTPUT and HEADPHONE output.