Does anyone know the Unchained flanged settings done with the Kemper? Is it possible?
Posts by rik777
-
-
You've gotta check out the new Guidorist Van Welden pack! Great VH tones in there!
-
The BE-100 profiles I've found are OK, but wanted something a little more accurate to what I hear/feel in my 2018 BE-100. I worked pretty hard doing these profiles, and think they came out really good. I carefully tweaked for a very neutral sound that has a fair range of adjustment in EQ and gain settings. The pick attack is a little spongier than the first ones I made.
Basically, I've uploaded 6 Friedman BE-100 profiles labeled "Vintage PAFs" and "Med Output PAFs." I've painstakingly tweaked them to work best with certain kinds of guitars/pickup. The vintage PAF profiles work extremely well with Strats, Teles, and low to medium output humbuckers. The mid output profiles are great for higher output humbuckers, or to fatten up single-coils a bit. It took several profiles, lots of mic adjustment, and experimenting with the refinement feature of the profiling mode. Anyway, you can find them on Rig Exchange if you're interested.
Download them and let me know what you guys think. These weren't just the average profile. I took a lot of things into consideration, compared several commercial BE-100 profiles, and experimented a lot with settings that would allow the maximum adjustment of the knobs. Some of the profiles I demoed weren't always so great after adjusting certain settings, so that was a big consideration. I think you can tweak these to a pretty good extent without losing anything in the tone.
Either way, let me know how you guys like them and leave some feedback. If you think they're good, I'll profile some other great amps and cabs for you.
FRIEDDUDE BE CLN Med Output PAFs
FRIEDDUDE BE MED Med Output PAFs
FRIEDDUDE BE HG Med Output PAFs(Generally brighter overall)
FRIEDDUDE BE CLN Vintage PAFs
FRIEDDUDE BE MG Vintage PAFs
FRIEDDUDE BE HG Vintage PAFsGEAR USED:
Mesa Boogie Open Back 1x12 With 75w Weber Silver Bell Alnico 12" Speaker
Shure SM57
Dimarzio Norton DP-160/Chopper set for med output profiles
Bareknuckle Riff Raff/Mule set for vintage output profiles
Off-Center mic 1" away from grill clothDid you remove the profiles? Nowhere to be found in RE.
-
atm I use this for all my solos & rhythm stuff:
(Seeking to re-create the sound of a Diezel® Paul)
and this for clean & crunch:
Bognar XTC
(Seeking to re-create the sound of a Bogner®
Ecstasy 101b)?
Pauli for solos and xtc for clean and crunch. Got it! Thanks Guidorist !
-
Guidorist if you had to chose, which would be your current favorite profile for lead, solo, single line playing?
-
That‘s Great to hear! Many THX!
The sound Clips will be online in a few days. As soon I have the Money to pay the Guitar Player. He charges me €500 for each Clip.
(Seeking to re-create the sound of a Carvin® Legacy 3 VL300 Steve Vai)
Get it FOR UNBELIEVABLE €5.49
-
Excellent condition, barely used. One of the best FRFR in the market today. Never been gigged. Has a slight scrape on corner. $760 +$25 shipping but will accept reasonable offers. Comes with original box and power cable. Here's the link with pictures:
-
If you are working in Performance Mode you can also try to choose the other display layout
Thank you Peter@Kemper. I have tried different layout. The problem is when playing outside, with a lot of sunlight on stage it is very difficult almost impossible to read the display. I'm trying to figure out how best to eliminate this.
-
Thx mate!
Let me know how you like it! ?
Looking forward to hearing the profiles Guidorist ! I purchased your Van Welden. Sounds great! Waiting to hear the Legacy.
-
Their clean to slight break up tones are the best. Also love the stomps and FX they include.
-
First I would make sure the contrast is set as high as possible but if that doesn’t work the solution is the same as all all other musical issues - Gaffer Tape!
I would just tape a little piece of cardboard in the appropriate position to shield the screen from the direct light.
Yes! Gaffer's tape is EVERYTHING solution! Thank you Wheresthedug .
-
Have had trouble viewing what's in the display when in an outdoors performance. Bright sunlight makes it almost impossible to read display. Any suggestions on how to improve visibility? Maybe attach something to block sunlight?
-
Yes I know about the website. I'm asking if they're still in business since they haven't been active on any social media or here on the forum.
-
Has anyone heard of Rock Profiles? Are they still around? I haven't seen any new posts or profiles from them. Their profiles sounded good.
-
I'm not sure mate it was 3 maybe even 4 years when I was using JerEvils profiles. Time flies
Indeed LiamThompson ! It was a few years ago. I just realized that. Well thank you for your JMP profiles. They still sound great. Cheers.
-
Gave these all a try now though my full setup and my 2 favourites I narrowed it down to were OD5 and OD14 and finally settled went settled on OD14.
Just adjusted the gain to 6.0, clarity to 1.6 and definition to 8.0 to fit my EVH Wolfgang for live use and I'd say its my favourite distorted hard rock profile I've heard. I've replaced all my live rigs with this profile, although I'm a self confessed tone chaser and everytime I think I've found the holy grail I hear something else a month later! Think this one will be sticking around for much, much longer.
LiamThompson Where are those two OD5 and OD14 that you speak about? Can't find them.
-
It's been awhile, Kemper-folk. Got my mitts on a Mezzabarba M-Zero and bought a Voodoo Modded master volume JMP/2204. Info and clips here:
https://petesprofiles.weebly.com/voodoo-marshall.html
https://petesprofiles.weebly.com/mezzabarba-m-zero.html
Seven clips in all of the amps, I mentioned not only what profiles I used but guitar and pickups too. Added some new tech to my profiles that I'm not quite ready to talk about yet but makes a huge difference. It's a different way of miking them up. You can hear the results.
Anyways, give em a listen if you'd like.
Pete
okstrat Do you have any clips of the Voodoo Marshall but played with humbuckers, maybe a LP? Thanks.
-
JerEvil these Splawn profiles are by far the best I've tried here on the RE. They're the only ones I use. Thanks for taking the time. Quality stuff.
-
Another nice one from the RE Jeremy Varao Splawn OD 23 ST.
-
LiamThompson His JMP 2203 profiles sound fantastic. Other than that super annoying screech that comes out of slot X it sounds great. Don't know what that screech is. I've had to get rid of it. Any time you turn that on it is deafening! Great tones Liam.