So i was going to load some new plexi profiles to try out, from the rig exchange. Everything is fine, but as soon as i press "import" all the LEDs freeze up, and the kemper just stands there until it after 1-2 minutes gets stuck in something that looks like the startup screen without the load bar. I tried updating my OS, and i tried other profiles. Any ideas?
Kemper freezes when i import profiles
- Jesper
- Closed
- Thread is marked as Resolved.
-
-
hey.
what is your FW version?
-
Did you try to use another USB stick?
-
hey.
what is your FW version?
Now its 2.0.1
I upgraded from 2.0.0 betaI'll try another USB stick soon, i just don't have another laying around.
-
How many profiles are stored on your KPA? There's a limit of 1.000.
-
I've had some trouble with USB sticks as well. I noticed that these extra small USB sticks can get pretty hot when plugged into the Profiler. Don't know if it was some thermal problem with your stick as well.
Cheers,
Martin -
How many profiles are stored on your KPA? There's a limit of 1.000.
I have around 50.
I've had some trouble with USB sticks as well. I noticed that these extra small USB sticks can get pretty hot when plugged into the Profiler. Don't know if it was some thermal problem with your stick as well.
Cheers,
MartinWell, that is not the problem. I had not used the USB stick for a day before the first time i tried, and before the last attempt i waited around an hour.
-
Mine was being weird, so I reformatted the memory stick and that fixed it!