Suggest me an Audio Interface?

    My problem is a little difficult.... XD


    I need an Audio Interface, More like a Rack I guess that can accept S/PDIF from my computer
    But also have an S/PDIF output and 1/4 Jack Outputs for L and R. AND Not run on the computer, No USB
    stuff ( unless it's only for power Because I have a soundcard installed already and need something
    to simply accept a SPDIF, output to my speakers through 1/4 jacks And also have an S/PDIF to output
    to the device Im already using for my headphones ).


    Maybe a Mixer is what im thinking of?


    [Blocked Image: http://s12.postimg.org/pvvsbxzh9/adda.jpg]

    I´d love to get in on this suggestions thing (if thats ok, op?). I´d need something with S/PDIF connections for parallel DI and Wet recording with usb connections to the PC, price range should be low (poor student).

    Quote from Hannes_ITS

    I´d love to get in on this suggestions thing (if thats ok, op?). I´d need something with S/PDIF connections for parallel DI and Wet recording with usb connections to the PC, price range should be low (poor student).

    This is what I have. Only like $100 or so, maybe a little more.
    http://media.soundonsound.com/sos/sep04/images/emu0404.l.jpg


    Comes with digital mixer software so you can route, send and return effects.
    Also has multiple inputs. SPDIF input and output, 2 1/4 jack inputs and outputs.
    So you can run your kemper in wet spdif to moniter it, Dry through a 1/4 jack to record
    and send either a 1/4 or spdif back to the kemper for reamping.


    Leaving 2 /14 jacks for output L/R for speakers Or a SPDIF depending on what you ren back tot he kemper.
    I run the 1/4 to the kemper and leave the spdif for my headphones because my VRM room sim thing only uses it.

    Quote from okstrat

    I have one of these, use it with my laptop sometimes. Works fine with the Kemper's S/PDIF in and out.


    http://www.ebay.com/itm/TASCAM…faces&hash=item5af6836756


    I have the same interface and there is no S/PIDF on there. Do you maybe mean the 144 mk2?

    Quote from Giogiogio4

    AND Not run on the computer, No USB
    stuff ( unless it's only for power Because I have a soundcard installed already and need something
    to simply accept a SPDIF, output to my speakers through 1/4 jacks And also have an S/PDIF to output
    to the device Im already using for my headphones ).

    So you don't want to be able to record what you are playing?


    You should really think into getting a complete external interface that replaces your sound card. Otherwise it will get a bit complicated and maybe expensive.

    Quote from AHChris

    So you don't want to be able to record what you are playing?


    You should really think into getting a complete external interface that replaces your sound card. Otherwise it will get a bit complicated and maybe expensive.

    I have a sound card. An Emu 0404. I need something that can receive and SPDIF AND has a SPDIF out plus two 1/4 jack outs for my speakers. My Sound card is set up so the Kemper
    Inputs SPDIF and receives through a 1/4 jack for reamping. Thus the Kemper takes one of my 1/4 outputs ( L or R ). I can't hook my SPDIF out to the Kemper because it is needed for my Focusrite VRM
    Box that requires a SPDIF. I need something That takes a SPDIF and has an SPDIF out so I can hook both my speakers And My box up and don't have to keep reaching behind everything and redoing it every time I need to listen to something through my VRM.

    I personally use an M-Audio Profire 610, but I always recommend Focusrite products to people. In your case, I'd recommend a Focusrite Scarlett 6i6 (USB, SPDIF in/out). It can be had for around $250 USD. Focusrite makes great products, the only reason I am using an M-Audio is because I bought it a long time ago and refuse to buy another interface, hah. Anyway, check out the Scarlett 6i6 here; http://us.focusrite.com/usb-audio-interfaces/scarlett-6i6

    Quote from DominionExodus

    I personally use an M-Audio Profire 610, but I always recommend Focusrite products to people. In your case, I'd recommend a Focusrite Scarlett 6i6 (USB, SPDIF in/out). It can be had for around $250 USD. Focusrite makes great products, the only reason I am using an M-Audio is because I bought it a long time ago and refuse to buy another interface, hah. Anyway, check out the Scarlett 6i6 here; http://us.focusrite.com/usb-audio-interfaces/scarlett-6i6

    Thats the problem. I do NOT need something that acts as an Interface . I have a sound card already. I just need something that accepts SPDIF so I can hook my speakers up from my PC And Has an SPDIF output so I don't have to keep unplugging my Headphone amp ( VRM box ) every single time I want to use my headphones and room sim.


    My Sound card Only has 2, 1/4 outputs and 1 spdif output. I can't hook my speakers up to the 2 1/4 outputs because the Kemper Takes up one of them with the SPDIF Input for reamping. So I need something that accepts a SPDIF cable and routes the sound. I Need the SPDIF output because thats the only thing the VRM accepts and it would be stupid to sit around unplugging an interface and plugging it back in every time I need to switch. Plus everything is routed just fine that allows me to reamp and monitor.


    THIS is what I need
    [Blocked Image: http://s12.postimg.org/pvvsbxzh9/adda.jpg]