Hi guys. I just got this expression pedal. Can somebody tell me if it's possible to control delay time using it? I bought it assuming I'd be able to assign it to any parameter, but the list on the Pedal page of the System section seems to be restricted only to the normal applications of an expression pedal. Any ideas?
Control delay time with Mission EP1-KP-GN.
- Mulgreaux
- Closed
- Thread is marked as Resolved.
-
-
All of the parameters are available for MIDI control, but not for a pedal plugged straight into the Kemper.
-
Looks like I'll be needing another pedal also in that case. Thanks for your help!
-
Yep, will need a foot controller that takes the expression pedal and sends out midi CC commands/messages.
Once you get that there are a number things you can do with it, delay mix, reverb time or mix, gain level, etc. -
Any recommendations? I've seen this one as a possibility, but it has an integrated cable, which will surely fail after a couple of gigs.
http://www.m-audio.com/products/en_us/EXP.html
I have a Decibel 11 Switch Dr which has an input for a midi expression pedal so ideally I want something that I can connect with a short patch lead.
According to the Switch Dr manual, there's an option to use a volume pedal for this and connect it using an insert cable. Anyone doing anything like this? I already have a Dunlop DVP1 volume pedal that would be perfect if this is a viable option. I'm going to try it out anyway.
What're you guys using?
-
The M-Audio is going to give you the exact same issue, since it's just a regular 1/4" expression pedal. Your Mission pedal into the Switch Dr should work fine, at least for now.
The only other option I can find is the MIDI Solutions Pedal Controller - http://www.midisolutions.com/prodped.htm - $140 USD - This can do it, but you'd need to be able to send MIDI SysEx messages to program it for whatever function you want, which would require you to have a computer interface with MIDI Out.