hey!
i bought the fcb1010 with uno4kemper chip!
the stomp boxes and the rigs are great
but i still cant activate the two expression pedals
i tried to do everything that i found on the forum in the menual and in google i just can make them work
can anyone explain to me how can i do that?
thanks!
omer.
FCB1010 expression pedals
- Foo
- Closed
- Thread is marked as Resolved.
-
I am wondering about the same! i installed the chip in my FCB1010 yesterday and everything worked, presets and switching in effect on the upper row! I did not had time to look into the pedals.. what is a simple way to adjust this pedals?
-
I don't own an FCB1010, but I think you have to calibrate those pedals before you can use them. Do a search on the forums, this topic has been discussed and resolved.
-
Is the volume pedal not working at all ? Thats strange, as although there are a number of setting you can change, but the uno4kemper should just work 'out of the box'.
If you go to page 6 on the System menu of the Kemper, you should see Uno for Kemper connected displayed, if you push the 'Show ctl info' button in top right of the screen, you should be able to test the expression pedals. -
I don't own an FCB1010, but I think you have to calibrate those pedals before you can use them. Do a search on the forums, this topic has been discussed and resolved.
THIS! Do a calibration per the original FCB manual.
-
noone of the pedals were working, but switching was ok both preset and stompbox change
-
You need to calibrate it, check out the manual here: http://www.uno4kemper.com/UnOforKemper_manual_1_3.pdf
If there is still trouble after troubleshooting, then call them up and say you want a new one
-
Check of you have activated 'volume to wah' (rig menu) in this rig.
-
I try to press 1 and 9 when startup, but nothing happens after a while it just comes up --- when i move either ex pedal or volume nothing happens
what to do??
-
Did you calibrate the pedals first? Page 12 here: http://www.behringer.com/assets/FCB1010_P0089_M_EN.pdf
Basically, hold 1 and 5 while starting the unit up. It will ask you to move one pedal all the way to heel position, then press the Up switch. Move the same pedal all the way to toe, press Up. Move the second pedal to hell, press Up. Second pedal to toe, press Up. Restart the unit, and both pedals should now do their jobs - you can now turn it off and start up with 1+9 if you want to swap them.
-
Now i finaly get the pedals to work. Either 1-5 or 1-9 was the right kombination. i read the Behringer FCB1010 manual and it said 1-3 press when start up. It did a selftest and went trough all switches and relays. then it was simply to move the pedals one by one, in lowest pos., enter highest pos enter. Then all was ok. Volum was ok but not my favourite. I am used to volumboost from my amp
