Crappy photo I know but low light isn't the best light
cool setup, i wish you had a clear picture of the back of the rig so I could see how you have hooked up the kemper and the axe fx. cheers.
Crappy photo I know but low light isn't the best light
cool setup, i wish you had a clear picture of the back of the rig so I could see how you have hooked up the kemper and the axe fx. cheers.
Crappy photo I know but low light isn't the best light
Natural setup, Kemper on top
Starting a new band this weekend coming, so had to dust off the rig and test everything out (I'd not used the DXR in 9 months or so):
[Blocked Image: https://igcdn-photos-c-a.akamaihd.net/hphotos-ak-xfa1/t51.2885-15/11085200_841190405952490_1795117474_n.jpg]
my Kemper head currently. with the advent of the new delays, the tc electronic will probably go, maybe I'll put a wireless in there... Sitting on top of my converted Laney cab.
Welcome, Swisss!
cool setup, i wish you had a clear picture of the back of the rig so I could see how you have hooked up the kemper and the axe fx. cheers.
Although the images below look like a rats nest of wires, the actual 4CM connections between those two is really simple. I run the Main Output of the Kemper into the Input 2 FX Return of the Axe FX II. I also run a single cable from the Output 2 FX Send (L) on the Axe FX II into the front input of the Kemper. That's it. The rest is standard; Connect the Axe FX to my audio interface via Output 1, though I additionally connect via S/PDIF.
cool setup, i wish you had a clear picture of the back of the rig so I could see how you have hooked up the kemper and the axe fx. cheers.
Here's a link to the reference I used to do it: http://forum.fractalaudio.com/…imate-tone-r.90422/page-2
In the rig I'm using the Axe primarily for FX...lol...and the kemper for pure amp sweetness, although there are times when I would use the Axe singularly. I then program the mastermind to send the midi changes to both so I can get the right amp with the right effects without having to do anything terribly dodgy. The effects gizmo allow me to either use the Axe or Kemper alone or together as well as select my input to either be from the wireless unit or direct in the event that the wireless unit craps out or I just want to use an instrument cable. The output is either through the radial DI or a Hi Z and the Midi box in the lower right allows me to send power to the GT over a 7 pin.
Here's mine
Here's mine
Nice one @kalel370 - welcome to the community by the way
What kind of Ibanez with reversed headstock is on the the right?
Nice one @kalel370 - welcome to the community by the way
What kind of Ibanez with reversed headstock is on the the right?
Thanks! It's a USA custom Ibanez from 1990 believe. I recently bought it from a friend of mine who got it off of eBay. I added a Dimarzio evolution to it. It plays and sounds fantastic.
Thanks! It's a USA custom Ibanez from 1990 believe. I recently bought it from a friend of mine who got it off of eBay. I added a Dimarzio evolution to it. It plays and sounds fantastic.
And looks crazy good any chances to post some high resolution photos? Are the graphics on the body original or added later?
the graphics are original. Here is an original ad from 1989. I don't have any hi res pics sorry.
Display MoreAlthough the images below look like a rats nest of wires, the actual 4CM connections between those two is really simple. I run the Main Output of the Kemper into the Input 2 FX Return of the Axe FX II. I also run a single cable from the Output 2 FX Send (L) on the Axe FX II into the front input of the Kemper. That's it. The rest is standard; Connect the Axe FX to my audio interface via Output 1, though I additionally connect via S/PDIF.
Thanks man, very helpful. cheers.
bump
Here's a shot of my KPA with 2x12 Orange Cabinet.
I use the Boss for Volume and the Dunlop for "triggered" wha.
My Kemper is in a 4U rack with a g50 mounted just above it and Furman reverse racked in the back.
I'm considering flying with it this Christmas to a gig, but I'm worried about moisture and getting banged around in the cagro hold
Nothing beats the Kemper. After I bought it I sold everything!
up , let's see more folks
cool setup! could you tell me which stand you are using ?
Built a case for 25 €
Display MoreBuilt a case for 25 €
Beautiful, brilliant! I love the details, like the frame piece attached to the sliding front panel. I see that it acts like a handle
in addition to its aesthetic function.
Display MoreBuilt a case for 25 €
Beautiful! How long did it take you to build this?