In tha last few days my Kemper is very slow. I press a button but it has a delay of about 5 o 6 seconds. It is like when your computer has the RAM full. You press many keys and after a while it begins to perform all those actions. It is almost useless.
Any idea about what can it be?
How can I reinstall the OS?
ISSUE: Kemper slow...very slow
- Jevo
- Thread is marked as Resolved.
-
Do you have any floorboard connected to your KPA / or you are using some midi interface to your PC? You can try switch on the unit holding the system key.
-
No only reset the system state. If you want full factory reset make your backup first:
Attention!!
You will loose all your content and settings!!!!!:
1. Turn off KPA hold soft 1 button
2. Turn on KPA to Tuner mode holding soft 1
3. enter recovery with soft 1
4. Press soft 3 Init&Factory Content
5. press soft 2 for yes. -
I would contact support about this issue. I've never heard of a Kemper going slow
-
Make a backup and contact support! Attach the backup ... maybe that helps to spot the problem.
-
Not sure but I recently read about an issue with the internal battery and a loose DSP chip or motherboard. Did you check this? Or maybe you can find the threads about these issues...
-
Not sure but I recently read about an issue with the internal battery and a loose DSP chip or motherboard. Did you check this? Or maybe you can find the threads about these issues...
mmh... interesting. I also thought abut the lithium battery. Will open the unit and see what I find inside...maybe a racoon ate some cables.
-
You should never open the Profiler unless you are a certified service technician. Doing so will void your warranty.
If you get the message that a hardware problem was detected and that you should contact support you should exactly do that and not attempt to apply any repair yourself.
