I used to run 2 kempers midi'd together and switching with a midi moose. Now I'm using performance mode with a profiler remote. Is there a simple way to have the main KPA in performance mode switch the cloned KPA in performance mode so they run identically?
2 KPA midi hookup
- andy_i
- Thread is marked as Resolved.
-
-
should be able to MIDI one to the other and set performance to send PC change to channel you have 2nd one set to. That's what I do with my GR55
-
Is there a way to set it to send the program changes in system / global without setting up one per rig/slot?
-
Not quite sure what you're asking., but the PC numbers are already assigned in order for the slots in performance mode
-
Is there a way to set it to send the program changes in system / global without setting up one per rig/slot?
It can be done pretty quickly, but has to be done one at a time:
Transmitting MIDI Commands in Performance Mode
MIDI commands can be triggered and transmitted to up to two external devices, whenever a Slot is loaded in Performance Mode. Select “MIDI Settings” on page “Slot Settings” and select the MIDI program change numbers associated with Slots of current Performance. In System menu, navigate to page “Perform Mode: MIDI”, and use soft knobs 1 and 2 to assign a MIDI channel to each of the external devices. Use soft buttons 1 and 2 to determine whether the corresponding external devices are connected to MIDI OUT or MIDI THRU. -
i think when you hook up both to the one remote
via an ethernet hub or router
booth should be switch in the same way -
i think when you hook up both to the one remote
via an ethernet hub or router
booth should be switch in the same wayTwo way comms and power on the CAT-5 so that seems unlikely.