It would be enough
Rise and fall time between rigs eve slots in perform mode.
![](https://www.kemper-amps.com/wbb/images/avatars/d5/4510-d5c181618002aa4b476b0a7356af451247566a18.jpg)
Rise and fall time betwen rigs.
-
-
Rig X-Fade Time (System/Audio Setup)?
-
-
It would be enough
Rise and fall time between rigs eve slots in perform mode.
I tried but there is no difference between 0 - 10. -
I think you're discussing two different things; Rig X-Fade is for changing the time it takes to move between Performance slots, while you're talking morphing, right @MirekGR10 ?
You can set the rise and fall time in a different menu (not near my KPA at the moment, so can't remember where it is, but I'm sure you'll find it in the addendum). -
When I switch slot 1 ( morph is rise ) to slot 2(Cc#51) , didn't change preset .
Those controllers represent a keystate/buttonstate. send value 1, then value 0, the delta time in between matters. -
I think you're discussing two different things; Rig X-Fade is for changing the time it takes to move between Performance slots, while you're talking morphing, right @MirekGR10 ?
You can set the rise and fall time in a different menu (not near my KPA at the moment, so can't remember where it is, but I'm sure you'll find it in the addendum).Ok.
I need set rise and fall time like in morph feature between rigs.Because, Rig X-Fade Time there isn't options like in Morph features and I do not hear any difference between 0-10.@timo
Thank you I´ll try it. -
Ok.
I need set rise and fall time like in morph feature between rigs.Because, Rig X-Fade Time there isn't options like in Morph features and I do not hear any difference between 0-10.@timo
Thank you I´ll try it.I don't understand what you want to do.
You cannot morph between rigs. -
I don't understand what you want to do.
You cannot morph between rigs.Yes I know !!!
This is FEATURE REQUEST !!!!!!!!!
I want to switch A rig to B rig with bars or sec.or tempo settings, like is in morph mode. -
Yes I know !!!
This is FEATURE REQUEST !!!!!!!!!
I want to switch A rig to B rig with bars or sec.or tempo settings, like is in morph mode.I see. Thank you.
-
Ah yes, that clears it up!
-
FWIMBW Sam, the crossfade time works when browsing rigs through RM as well, so I'd assume it works in the Browse pool too, but you probably already knew that.
-
FWIMBW Sam, the crossfade time works when browsing rigs through RM as well, so I'd assume it works in the Browse pool too, but you probably already knew that.
Didn't know that actually Nicky, as I don't use the setting myself
Thanks for the info!
-
Those controllers represent a keystate/buttonstate. send value 1, then value 0, the delta time in between matters.0k.I tried.
slot 1 Cc# 50/1 ; Cc# 50/0
slot 2 Cc# 51/1 ; Cc# 51/0
etc.Still incorrect switching i f previous slot is rise.
-
Didn't know that actually Nicky, as I don't use the setting myself
Thanks for the info!
Glad to have been of service, 'Bro man.It makes for smoother browsing, bud.
-
I need confirmation from Kemper
when we go from a rig in morphing up to a rig that contains morphing, we arrive in the lower position forcing, and therefore with a delay imposition of the mix at 0% since programmed like that in position Morph low, so it cuts the Delay brutally and the X fade Rig does not work
on the other hand if we pass on a Rig that has no morphing on the delay, it is not concerned with a forced 0% delay mix and let the X fade ... my question is: how to do so that the Xfade works in all cases.