This can't be... what am I doing wrong?

What are you so concerned about? It's not like you like the sounds you're getting right now.

There are several types of resets; if this doesn't work, then I advise you to contact support, who might direct you to do another type of reset - or do some other type of troubleshooting.

If you haven't messed with anything, there's no harm done in doing the reset. Even if you have - as I said, you don't like the current tones you're getting (or more precisely, they're wrong, as evidenced by sinmix' and my reampings).

It's not like you'll break warranty or anything. It sets some variables to their default state, the way they should have been when you received the unit.

@Michael_dk can you compare global settings? Have the OP post pics.

....

Quote from Dean_R

I wanted to help out and wanted to Reamp the DI but instantly realized from looking at the wave file that the DI was obtained incorrectly.

DI of the guitar shouldn't be that hot regardless whether you have the hottest active pickups, it's impossible.

It has already been established that reamping with other kempers yield different tone. I dont think theres an issue with the di

<opens a bag of big sour patch kids>

....

..

Quote from Dean_R

Sure there is, that's why the results are different, they shouldn't be unless his is defective and that's likely not the case.
If Sonic would Press output button, and change the output option for SPDIF to (GIT/master left) and records anything then record two mono tracks, he would have a proper DI and wet (profile) track. Reamping that should yield identical results.

I think this is exactly what he has done. And sinmix and i have gotten identical results. Who is the third reamper you refer to innyour other post?

Man, just do a factory reset. You should have done it before even starting this thread. Backup everything if you want and do it. Most of the times it solves these kind of problems. Just after the reset check again for pure cab option to be off.

Quote from SonicExporer

That said, I was however wondering how we know the dry signal level being reamped back into the KPA is similar to the level my guitar fed into the front end of the KPA originally.

This is why i asked for your clean sens value - this allows me (and sinmix, judging by his reamped track) to gain stage properly using the reamp sens parameter in the kemper.

Quote from metalmike

Man, just do a factory reset. You should have done it before even starting this thread. Backup everything if you want and do it. Most of the times it solves these kind of problems. Just after the reset check again for pure cab option to be off.

Exactly - and good call on checking the pure cab parameter afterwards, as it now defaults to 3.0, right?.

Quote from Michael_dk

Exactly - and good call on checking the pure cab parameter afterwards, as it now defaults to 3.0, right?.

That's right

Quote from schreckmusic

@sinmix has his own agenda which is to promote his cabs. Which is boring and funny at the same time.

Hahahaha sorry Man but You are very funny not only You And yes my custom cabs sounds diff than many other Famous but at the same time very good. I can post many of examples to proof this, but this not make sence. Becouse if you start with "@sinmix has his own agenda which is to promote his cabs" i can say give up - that's all. Maybe one example:

1 part - Deadlightstudio Peavey XXX free profile Marshall 1960 cab sm57/md421

2 part - My Marshall 6100 ( from my Free Pack) also on Marshall 1960 cab single sm57

Even if 2 diff amps were profiled i hear this cab character sound in both profiles - but for You probably sounds totally diff, and for @VESmedic for sure

SAMPLE: http://www.brickwall.pl/1960/

End of OT - sorry. More info via PM if you want

@SonicExporer - factory Reset! - Go!

Stay Metal!

Quote from SonicExporer

No luck guys, I did the factory reset and all I could tell it did was mess up my screen/Led/button light settings and change some of the output settings. I re-recorded some tracks for A/B comparison and absolutely no improvement or difference.

Darn. Time to call in the big boys (ie. contact support). Especially since you're on a time table - don't delay.

,,,

Quote from Dean_R

The only way to find out would be to Reamp the DI track you provided and compare the results to SinMix track..

IMO its not a DI signal problem, "Hot" DI or DI with high volume = more gain on reamped track that's all. TBH i think its a cab part problem, maybe try different FW version?

Stay Metal!