There are many good clean tones, such as
Tone King, Fender Twin,
i will look some profiles and let you know the correct names, i bet you will find your tone!
thanks for the sound clips, regards
Claudio
There are many good clean tones, such as
Tone King, Fender Twin,
i will look some profiles and let you know the correct names, i bet you will find your tone!
thanks for the sound clips, regards
Claudio
The official Kemper videos are a wealth of knowledge as is the Deeper view reference manual. Check my Sig!
I was going to mention adjusting your gain, adding some compression and EQ, even some Sag or Clean/Distortion sense. Then I thought about H.W. So, having said that, check out his channel. Jonathanrsullivan https://www.youtube.com/channe…HVYkoRHqyg_mDZRVvg/videos
Some ideas to get you rollin'!
EQ!
Clean/dist. sense!
Touch Sensitivity!
Also, shout out to Frank! He recently has started a channel: Eltzejupp
https://www.youtube.com/channe…AprZfO-Gt-6Tjwsr9g/videos
Hopefully these are helpful to get you closer to what you're after!
This profile:
ST- '59 Fan BM 2 - GRUFF is a Bass Rig and has fender bass man pre amp that i have in a real tube amp and it is killer
i think that can be tweaked to get the exact sound you need
one of the best clean tones i found was
Dumble 1978 Clean - XAVIO
both at rig exchange
regards,
Claudio
Display MoreThis profile:
ST- '59 Fan BM 2 - GRUFF is a Bass Rig and has fender bass man pre amp that i have in a real tube amp and it is killer
i think that can be tweaked to get the exact sound you need
one of the best clean tones i found was
Dumble 1978 Clean - XAVIO
both at rig exchange
regards,
Claudio
Thank You so much! I will try them and tell you what I got. By the way is guitar model crucial in this situation?
Thank You so much! I will try them and tell you what I got. By the way is guitar model crucial in this situation?
I think that the ST- 59 Fan BM2 is too much bright so i used a warm humbucking with it
the other profile is more warm and you can use the single coil, but you should try any guitar you want with because both are
too very good clean profiles... maybe next kemper's update with the release of the new reverbs we will have a decent plate reverb and that may help also to get a good tone...
Massve +1 for a good plate reverb. i have no need or interedt n all the fancy effects reverbs but great room, hall and plate are essential in my book.
I think that the ST- 59 Fan BM2 is too much bright so i used a warm humbucking with it
the other profile is more warm and you can use the single coil, but you should try any guitar you want with because both are
too very good clean profiles... maybe next kemper's update with the release of the new reverbs we will have a decent plate reverb and that may help also to get a good tone...
Alright I'll give it a try and yeah hope the new ones are good!
Dear You Guys,
I don't know what you guys are doing talking about rigs that do not appear on the rig manager/ rig exchange and claim you try them and give an opinion. So what are you doing?
The 1978 Dumble CLEAN - XAVIO does not come up under any of those keywords on the RE with my RM.
If anyone wants this profile or rig it is not on the rig exchange but you can get it in a zip file with both DP DUMBLE 1978 OD and DUMBLE 1978 Clean both by Xavio, for free, from this forum, in a link in a thread posted by DaanJM page 1 of:
Anyone has this beautiful rig?
I quote Juluxx:
Search « DUMBLE 1978 Clean » on the forum.
It’s near SRV sound. I’m trying. It’s Perfect ! (For my newbee ears)
https://www.kemper-amps.com/fo…?postID=381735#post381735
look for the zip file.
https://www.kemper-amps.com/wb…ent/4491-dumble-rigs-zip/
(6.83 kB, downloaded 307 times, last: Tuesday, 7:54 pm)
Thank Juluxx, one cool dude!
I can't try ST- '59 Fan BM 2 - GRUFF nor will I chase it when the keywords are invalid on the RE.
Display MoreDear You Guys,
I don't know what you guys are doing talking about rigs that do not appear on the rig manager/ rig exchange and claim you try them and give an opinion. So what are you doing?
The 1978 Dumble CLEAN - XAVIO does not come up under any of those keywords on the RE with my RM.
If anyone wants this profile or rig it is not on the rig exchange but you can get it in a zip file with both DP DUMBLE 1978 OD and DUMBLE 1978 Clean both by Xavio, for free, from this forum, in a link in a thread posted by DaanJM page 1 of:
Anyone has this beautiful rig?
I quote Juluxx:
Search « DUMBLE 1978 Clean » on the forum.
It’s near SRV sound. I’m trying. It’s Perfect ! (For my newbee ears)
https://www.kemper-amps.com/fo…?postID=381735#post381735
look for the zip file.
https://www.kemper-amps.com/wb…ent/4491-dumble-rigs-zip/
(6.83 kB, downloaded 307 times, last: Tuesday, 7:54 pm)
Thank Juluxx, one cool dude!
I can't try ST- '59 Fan BM 2 - GRUFF nor will I chase it when the keywords are invalid on the RE.
Hi
sorry that i posted that both rigs were at rig exchange, in fact maybe they were and are not anymore, anyway
they are both free and i am glad that you found the dumble rigs that i suggested and kindly posted the link here to anyone download then
regarding the Fender BassMan i do not know why is not showing at rig exchange either, in my kemper it came as a default rig and i just copied the same name that appear at my kemper's display
if you search at rig exchange for FAN or BM you will find Fender Bman 59* that is almost the same, but if anyone wants to try that exactly rig just PM me that i will send the file to you,
again, there are plenty of good profiles at rig manager, the suggestions i made are more to you know the amps and you can look for then and try all profiles to check which ones matches your sound system, a good profile can sound bad or good depending of your speakes, cabs, frfr, etc...
BTW i am playing the Dumble rig everyday and it is really good
The rig exchange is very tough to search, so good luck. It’s due to profile names. Type in Joe Satriani and nothing comes up. If there was it would be named something like “mar jump 45 hi sue”. Lol how the heck would I know to search for that?
I hate the rig exchange
To be fair that’s not really Rig Exchange’s fault. It the people uploading the profiles to it.
That actually is exactly what I mean.